Audeze Euclid In Ear Earbuds User Manual Guide : I will unbox the user manual of Audeze Euclid In Ear Earbuds.
Audeze Euclid In Ear Earbuds User Manual Guide
|Transducer Type||Planar Magnetic|
|Magnetic Structure||FluxorTM Magnet Array|
|Magnet Type||Neodymium N50|
|Diaphragm Type||Ultra-thin UniforceTM|
|Frequency Response||10Hz – 50kHz|
|THD||<0.1% @ 100 dB SPL|
|Sensitivity||105dB/1mW (at drum reference point)|
|Max Power Handling||500mW|
|Min. Recommended Power||50mW|
|Wired Connection||Braided MMCX|
|Weight||15g/pair without cable|
|Sound Port Diameter||5mm|
Volume level is subjective and everyone perceives it differently. Listening to music for long periods of time at excessive levels can cause irreparable damage to your ears. Reduce the volume levels of the source device before listening to your headphones. Gradually increase the volume until you reach the desired level. Enjoy your headphones with safe listening habits in mind.
Always maintain a distance of at least 8 inches (20cm) between the headphones and a cardiac pacemaker, implanted defibrillator, or other medical devices, as the Euclid contains permanent magnets.
Keep the product, accessories and packaging out of reach of children. This product is not intended for children under the age of 12. Product Registration
Register your product at www.audeze.com/apps/product-registration to receive information, updates and news. Please keep the Serial Number card in a safe place.
The Euclid is the world’s most advanced closed-back, in-ear planar magnetic headphone, using Audeze’s patented power-enhancing FluxorTM Magnetic arrays, FazorTM elements, and ultra-thin diaphragms carrying Audeze’s UniforceTM Voice-Coil technology. The result is astounding sound quality previously unheard of at this size. It’s flexible, portable and lightweight; a true statement of exclusive elegance inside and out.
Connecting Your Headphones
Look for the Left (Blue) and Right (Red) indicators on the two MMCX cable ends and match them to the headphone’s L and R indicators to connect. Press firmly until the
connectors click and lock into place. To remove the cable, hold both connectors firmly and pull straight out until the cable pulls free.
The Euclid in-ear works wonders with smartphones, tablets and portable players. You can dramatically improve the sound using a high-quality headphone amp. Audeze has
supplied audiophile grade cables for commonly used connection types; most after-market cables with MMCX connectors can also be used.
Ear Tip Selection and Fit
The tip type used with Euclid in-ear headphones significantly affects the sound. The correct fit delivers greater comfort and isolation, better bass response, and a more accurate tonal balance. Since everyone’s ears are different, Audeze supplies multiple types and sizes to choose from. To find the best fit for your ear canal begin with the smallest tip and work up in size until you find a comfortable fit with a good seal that keeps the headphones in your ears as your head moves normally.
To change eartips, simply pull the installed tip straight off, then push its replacement straight on the eartube until it snaps into place over the tube’s ridge.
To insert the Euclid earpiece into your ear canal, position the earpiece with the A logo slightly sideways, and press inward gently while rotating it backwards until the logo is
right-side up and the earpiece rests in the bowl of your ear. Loop the cable over the top and back of your ear.
You can see a video on how to get the best fit here: https://www.youtube.com/watch?v=CEt3HhkvzZc
If you have further questions or need assistance, please visit the Audeze Customer Service Center or email [email protected]
Care and Fit
Always store your Euclid headphones in their protective case when not in use
Keep the case closed and store in a dry environment
Avoid storing in extreme heat, cold or humidity
Avoid exposure to liquids or harsh chemicals
Regular maintenance is not required, other than cleaning the ear tips, but an occasional wipe with a clean, dry, lint-free cloth is recommended. For best results when cleaning eartips, remove them from the headphones and wash in warm soapy water, then rinse thoroughly in cool water and dry with a lint-free cloth.
Never pull on the cable to disconnect the Euclid headphones from your music player. Hold the plug at the end of the cable and pull to disconnect.
Please keep the Serial Number card in a safe place, it will be required for any service requests.
Additional Product Information and Limitations
Warranty replacements: Audeze LLC strives to improve the performance of our products, and therefore reserves the right to make changes to our design/specifications/ materials at any time without notification. Audeze LLC may, at its discretion, choose to replace the Audeze LLC Product completely with a new or remanufactured product. In the event of product obsolescence, a suitable replacement will be chosen based upon the features, the intended use (as determined by Audeze) and the retail price of the original Audeze LLC Product.
Product: All warranty replacements are guaranteed for 90 days or until the conclusion of the Warranty Period of the original Audeze LLC Product, whichever period is greater. Audeze LLC does not provide advance replacements for Audeze LLC Products.
Determining authority: Audeze LLC will be the final determining authority for all potential warranty claims for service and/or replacement.
How to claim warranty service
A) you reside in the United States and purchased direct from Audeze LLC, email [email protected]
B) If you reside in the United States and purchased from an authorized Audeze LLC dealer, contact your dealer or [email protected]
C) If you are an international customer who has purchased through an authorized local dealer, contact your local dealer or distributor.
D) If you are an international customer who purchased direct from Audeze LLC you must contact Audeze LLC at [email protected] for service and support. Any shipment back to Audeze LLC for repair will be at the expense of the customer.
You will need your serial number and proof of purchase to complete any RMA process.