Behringer BH480NC Bluetooth Headphones Quick Start Guide

Behringer BH480NC Bluetooth Headphones Quick Start Guide : In this user guide manual, we will look at the Behringer BH480NC Headphones

Behringer BH480NC Bluetooth Headphones Quick Start Guide

Behringer BH480NC Bluetooth Headphones Quick Start Guide
Behringer BH480NC Bluetooth Headphones Quick Start Guide

Specifications

Driver unit40 mm
Impedance32 Ω
Frequency response20 Hz to 20 kHz
Sound pressure level (SPL)100 dB @ 1 kHz (110 dB peak)
Rated power30 mW
Peak power50 mW
BluetoothVersion 5.0
Frequency range2402 MHz ~ 2480 MHz
Channel number79
Max output power5 dBm
Bluetooth rangeup to 33 ft (10 m) in line of sight
CODEC supportaptX, AAC, SBC
NFC (Near Field Communication)Yes
Call supportCVC 8.0
Mic sensitivity42 dB (± 3 dB) @1kHz, 0 dB = 1 V/Pa
Battery typeRechargeable lithium battery
Working timeup to 30 hours (up to 20 hours with ANC +
Bluetooth)
Charging timeunder 2 hours via USB 5 V / 500 mA
Fast chargingYes
AccessoriesUSB charging cable, 3.5 mm AUX cable, 6.3 mm adaptor, airline adaptor, zipper case

Important Safety Instructions

  1. Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions.
  5. Do not use this apparatus near water.
  6. Clean only with dry cloth.
  7. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.
  8. Leaving a battery in an extremely high temperature surrounding environment can result in an explosion, or the leakage of flammable liquid or gas.
  9. A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
  10. Do not disassemble or modify this product.
  11. Do not replace a battery. It can defeat a safeguard.
  12. Please store this product in a clean and dry environment.
  13. Charge it once a month (minimum).
  14. Do not leave unattended while charging.
  15. WARNING! Choking and Swallowing Hazard. Keep the product safely out of reach of children and pets. The small size and the internal battery present a
    choking and swallowing hazard. Failure to follow instructions may lead to permanent damage or death.
  16. WARNING! To prevent possible hearing damage, do not listen at high volume levels for long periods.

Accessories List

  • BH480NC headphones x 1 pair
  • Zipper case
  • USB charging cable
  • 3.5 mm AUX cable
  • 6.3 mm adaptor
  • Airlines adaptor
  • This quick start guide

Features

  • Studio-grade stereo headphones provide superior sound quality, delivering thumpy bass, full mids and detailed highs
  • Accurate sonic performance to reproduce the full spectrum of a track as it was arranged
  • Advanced hybrid active noise cancellation for undisturbed listening on any environment
  • Bluetooth with automated device pairing via built-in near-field communication (NFC)
  • High-capacity lithium battery delivers up to 30 hours of non-stop Bluetooth playback (up to 20 hours with ANC activated)
  • Built-in Qualcomm aptX high quality and low latency audio for enhanced video watching and gaming experiences
  • Built-in CVC 8.0 isolates the user voice from surrounding clutter for clear phone conversation
  • Fully adjustable headband with extra-large over-ear protein memory foam provides lasting comfort and excellent isolation
  • Supports fast charging technology, 5 minute quick charge to get up to 2 hours of wireless playback
  • Up to 10 m (33 ft) of wireless freedom
  • Includes carry case, airline adapter, 3.5 mm audio cable, 6.3 mm TRS adapter and USB charging cable

Controls

Behringer BH480NC Bluetooth Headphones Controls
Behringer BH480NC Bluetooth Headphones Controls

Getting Started

Charging

  • Before use, please read this quick start guide carefully and keep it in a safe place.
  • Charge the built-in battery for at least four hours before first use.
  • Do not leave unattended while charging.
  • Please regularly charge the battery if you have not used the cable for a long time (more than 3 months).
  • Please use the supplied charger cable only.

To charge the internal battery, follow these steps

  1. Connect the smaller end of the supplied USB cable to the MICRO USB jack.
  2. Connect the other end to a powered USB jack on your computer or an AC power supply (not included).
  3. The Charging/Bluetooth LED will change color to red during charging.
  4. When fully charged, the Charging/Bluetooth LED will turn off.

Low Battery Warning

When the battery voltage drops below 3.0 V, there will be a warning beep every 60 seconds. The headphones will automatically switch off when the battery voltage drops lower then 2.9 V.

WARNING: Avoid the following

  • Replacement of a battery that can defeat a safeguard.
  • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
  • Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
  • A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

ANC (Active Noise Cancellation)

The ANC (Active Noise Cancellation) function is available in both wired and wireless conditions. The ANC circuit must be switched on/off manually. To switch on the ANC circuit, move the sliding ANC switch to the “on” position. The ANC indicator LED will light green. To switch off the ANC circuit, move the sliding ANC switch back to the “off” position. The green LED light will shut off.

Bluetooth pairing

You will hear voice prompt for pairing after power on. Please refer to function map table for other functions.

NFC (Near Field Communication)

You can also pair your headphones to a Bluetooth device by using the built-in
NFC function. To pair with NFC, simply bring your Bluetooth device physically close (within 5 cm or 2 inches) to the NFC marking on the headphones.

Bluetooth functions for Bluetooth-enabled earphones can be accessed from the control section embedded in the right earpiece.

Power ON / OFF

Power On: Press center key for 3 seconds.

Power Off: Press center key for 3 seconds.

Music Controls

Play the TrackPress center key once
Pause the TrackPress center key once
Volume Up by 7%Press “+” key
Volume Down by 7%Press “-” key
Next TrackLong Press “+” key
Previous TrackLong Press “-” key

Phone Call Controls

Answer incoming callPress center key once
Refuse incoming callPress center key twice
End the callPress center key once
Volume Up by 7%Press “+” key
Volume Down by 7%Press “-” key
Last number RedialPress center key twice

Mic Control

Mic mute / unmute: Long press center key

Voice Assist Control

Activate Voice Assist: Press center key three times

LED Indication

ChargingRed
Fully chargedLED off
Pairing modeRed and Blue lights flashing alternately
Bluetooth connectedBlue
ANC activatedGreen

Source

Read More

Leave a Comment