Behringer True Buds Wireless Earbuds Quick Start Guide

In this guide, we will review the Behringer True Buds Wireless Earbuds Quick Start Guide. Let’s start.

Behringer True Buds Wireless Earbuds Quick Start Guide

Behringer True Buds Wireless Earbuds Quick Start Guide
Behringer True Buds Wireless Earbuds Quick Start Guide

Specifications

Bluetooth versionV 5.0
Bluetooth range10 meters (with no obstacles)
Frequency range2402 – 2480 MHz
Channel number79
Max output power<10 dBm
CODEC supportaptX, AAC, SBC
Driver unit6 mm
Impedance16 Ohm
Frequency response20 Hz – 20 kHz
SPL88 dB @1kHz (96 dB peak)
Rated / peak power3 mW (5 mW peak)
Microphone sensitivity(- 42 dB ± 3 dB) @1kHz, 0dB=1V/Pa
Battery typeRechargeable Lithium battery
Working timeUp to 4 hours (+ 12 hours via charging case)
Charging time2 hours via USB 5V / 500 mA

TRUE BUDS

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
  • Consult the dealer or an experienced radio/TV technician for help

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.n.

Important information: Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.

Caution

The Music Tribe is not responsible for any radio or TV interference caused by unauthorized modifi cations to this equipment. Such modifications could void the user authority to operate the equipment

FCC RF Radiation Exposure Statement:

  1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
  2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

Important Safety Information

  1. Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions.
  5. Do not use this apparatus near water.
  6. Clean only with dry cloth.
  7. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.
  8. Leaving a battery in an extremely high temperature surrounding environment can result in an explosion, or the leakage of flammable liquid or gas.
  9. A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
  10. Do not disassemble or modify this product.
  11. Do not replace a battery. It can defeat a safeguard
  12. Please store this product in a clean and dry environment.
  13. Charge it once a month (minimum).
  14. Do not leave unattended while charging.
  15. WARNING! Choking and Swallowing Hazard. Keep the product safely out of reach of children and pets. The small size and the internal battery present a choking and swallowing hazard. Failure to follow instructions may lead to permanent damage or death.
  16. WARNING! To prevent possible hearing damage, do not listen at high volume levels for long periods.

Accessories List

  • TRUE BUDS x 1 pair
  • Charging case
  • Charging cable, USB
  • This quick start guide
  • Silicone earplugs in 3 sizes

Getting Started

Before use, please read this quick start guide carefully and keep it in a safe place.

Please fully charge the earbuds before use. Do not leave unattended while charging.

Please regularly charge the earbuds if you do not use them for a long time (more
than 3 months). Please use the supplied charger cable only.

The earbuds are in the charging state (non-working state) when they are inside the charging case.

Take the earbuds out from the charging case and put into your ears, and you will hear a voice prompt for pairing (the earbuds are in BT discover mode).

LED indication on earbuds:

ChargingRed
Fully chargedRed light will turn off
Pairing modeRed and Blue lights flashing alternately
BT connectedBlue

Charging case:

  • USB Type C charging port at the rear.
  • The case display shows the percentage of charging case power remaining.

Features

  • Audiophile-grade true wireless earbuds provide wide frequency response (20 Hz – 20 kHz) delivering full bass and detailed highs.
  • Bluetooth 5.0 true wireless technology for exceptional sound quality with up to 33 ft (10 m) of wireless freedom.
  • Supports Qualcomm aptX high quality and low latency audio for enhanced video watching and gaming experiences.
  • Built-in CVC 8.0 isolates the user voice from surrounding clutter for clear phone conversation.
  • Sound isolating design with a variety of ear plugs to block outside noise for detailed music experience.
  • Seamless phone, voice commands, volume and music via touch control.
  • Secure in-ear design ensures earphone stability and comfort.
  • Splash proof construction (IPX4) is ideal for sports, work out and any outdoor activity that requires pure listening pleasure.
  • Up to 4-hours of battery life that can be extended up to 12 hours with the integrated battery charging case.
  • USB charging cable included.
  • Includes silicone earplugs in 3 sizes to ensure perfect fit.
Behringer True Buds Wireless Earbuds Features
Behringer True Buds Wireless Earbuds Features

General Operation

Power On / Off

Power OnTouch earbud for 3 seconds
Power OffTouch earbud for 3 seconds

Music Controls

Play the TrackTouch once on any earbud
Pause the TrackTouch once on any earbud
Volume Up by 7%Touch RIGHT earbud for a second
Volume Down by 7%Touch LEFT earbud for a second
Next TrackTouch LEFT earbud for a secon
Previous TrackTouch twice on the LEFT earbud

Phone Call Controls

Answer incoming callTouch once on any earbud
Refuse incoming callTouch twice on any earbud
End the callTouch once on any earbud
Volume Up by 7%Touch RIGHT earbud for a second
Volume Down by 7%Touch LEFT earbud for a second

Using both earbuds, or a single earbud

  1. Make sure both earbuds are off, and your phone or other device’s Bluetooth is turned off.
  2. CAUTION: Turn down the volume of your phone or other device. This is important to help reduce the possibility of hearing damage.
  3. Touch and hold both earbud buttons for 3 seconds, to turn on and enter pairing mode (the earbud’s LED will flash in red and blue).
  4. Turn on the Bluetooth mode on your phone or device, and search for the earbuds on your screen. Click and connect it. When connected successfully, the LEDs on both earbuds will turn blue.

Troubleshooting tips

  1. If your phone cannot find the earbuds, please check that the earbuds are in pairing mode. If the earbuds are not paired for a long time, please turn on
    the earbuds to pair again. Sometimes it is better to reset the earbuds and
    the bluetooth function of the phone.
  2. If it is not possible to talk or listen to music while connected successfully: You might need to choose Bluetooth “Mobile Audio” or “Media Audio” when using an Android system, or please choose Bluetooth on call interface.
  3. If your phone or device is paired/connected with the earbuds but there is no sound: Try removing the earbuds as a Bluetooth device and then pair with your phone or device a second time.

Other important information

  1. Register online: Please register your new MusicTribe equipment right after you purchase it by visiting behringer.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
  2. Malfunction: Should your MusicTribe Authorized Reseller not be located in your vicinity, you may contact the MusicTribe Authorized Fulfiller for your country listed under “Support” at behringer.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product.

LEGAL DISCLAIMER

Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.

Source

Read More

Leave a Comment