Boat Airdopes 451v2 Wireless Earbuds User Manual : This is new launched by boat. Let’s check the user guide of airdopes 451v2 bluetooth earbuds.
Join Us on Telegram : Click Here
Boat Airdopes 451v2 Wireless Earbuds User Manual
Package Contents
- 1N pair of TWS earbuds
- 1N Charging case
- 2N Pairs of additional earmuffs
- 1N Type-c charging cable
- 1N User manual
- 1N Warranty card
- 1N Catalogue
- 1N FAQ Card
- 1N GFPS ( google fast pair service) card
- 1N Read me card
Power On (First time user)
STEP 1:To switch the earbuds on (Smart Power On) simply open the lid of the charging case (when earbuds are inside). Our IWP'” (Insta Wake N’ Pair) Technology enables the earbuds to power on automatically, get connected and enter into the connection mode or
Long touch the CTC on both earbuds for 2 seconds to manually power on the earbuds. The led flashes in blue for 1 second
STEP 2: Both the earbuds will automatically pair with each other. The earbuds will enter into the Connection Mode, indicated by red and blue LED flashes.
Smart Power Off
STEP 1: After usage, remove both the earbuds from your ears.
STEP 2:Place the earbuds back into the charging case in correct orientation
STEP 3: The earbuds will automatically switch off (and enter into place your commands at ease charging mode)
Manual Power Off:
STEP 1: Long touch the CTC on either earbud for 8 seconds
STEP 2: Once the earbuds get turned off place them back inside the case and close the lid
Connection Mode
STEP 3: Turn on the Bluetooth functionality on your phone/media device and scan
STEP 4: Search for ‘Airdopes 451 v2’ and pair accordingly. Successful pairing is indicated by 3 flashes of blue LED for every one minute and ifthe pairing is unsuccessful/disconnected it again goes back to the pairing mode indicated by red and blue flashes.
Congratulations! Your earbuds are now connected successfully via Bluetooth.
Note
- Pairing mode lasts for 5 minutes. if the pairing time is miss then you will need to reconnect the ear buds and follow the above mentioned procedure.
- You may press the Pairing / Reset Burton present on the case in order to make the earbud5 enter into mode, in case they power off after inactivity.
- Subsequent Pairing: Airdopes 45 v2 remembers previously connected devices; once switched on, the earbuds automatically to the previously connected devices.
Factory Reset
Perform the Factory Reset in case you face any difficulty while operating your Airdopes 451 v2
NOTE: Before performing reset, clear “Airdopes 451 v2” from pairing device history by forgetting device.
Step I: Place both the earbuds back inside the charging case in correct orientation
Step 2: Long press the Reset Button on the case for up to I O seconds to do Factory reset, which is indicated by the flashing of white LED three times
Step 3: Shut the lid of the charging case and then re-open it again
Step 4: Once you take the earbuds out from the charging case, they automatically
Step 5: Congratulations! Your Airdopes 451v2 has been Reset.
Single Earbud Use
STEP 1: Please note that both the earbuds can be used in mono mode. Use Smart Pcn.ver On for switching on the desired earbud
STEP 2: The selected earbud will automatically enter the connection mode first indicated by a Blue LED flash for 1 second and then by red & blue LED flashes
STEP 3: Turn on Bluetooth on your phone/media device and search for ‘Airdopes 451 v2’ to connect.
NOTE:
- To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling usage
- You cannot skip tracks or return to the previous tracks in Mono mode.
LED Indicators/Functionalities
Charging the Earbuds & LED Indicators
Step l: Please insert the earbuds back inside the charging case in correct orientation.
Step 2: While on charge, once you open the case lid, the red LED stays solid for 2 seconds to indicate charging and then it turns off. Once fully charged the LED stays off even if you open the case lid later again
Step 3: Once the earbuds are fully charged, the charging case automatically switches off to save power.
Note
- Before using the ear-buds for the first time, it is recommended to fully charge the ear-buds. Also please keep the lid of the charging case close while charging.
- When the earbuds are in low power (below30%), once you open the case lid, the low power is indicated by red LED flashes 3 times and then by a voice prompt at 20% remainder battery.
Charging the Case & LED Indicators
Step: TO charge the case, plug one end Ofthe provided cable into the case and connect the other end to a computer,’ wall adapter/ powerbank, etc. The case LED turns into white during charging and once fully charged all the three LEDs turn into solid white.
Standby State Battery Indication
Status | LED Indicators |
Remaining – 33.33% | One LEDs stays solid |
Remaining – 66.66% | Two LEDs stays solid |
Remaining – 100% | Three LEDs stays solid |
During Charging
- If the battery is below 33.33% the first LED blinks
- If the battery is below 66.66% but above 33.33% the first LED, the first LED stays solid and the 2nd LED blinks
- If the battery is below 66.66% the first and second LEDs stay solid and the third LED blinks
- If the full charge is full, then all the LEDs stay solid.
Important Notice
When you open the case while the left earbud is inside the case or when you put the left earbud inside the case for charging then the case’s left LED initially blinks for 5 times. When you open the case while the right earbud is inside the case or when you put the right earbud inside the case for charging then the case’s right LED initially blinks for 5 times.
Basic Functions
- Voice Assistant: Long touch the CTC on either earbud for 3 seconds to activate the voice assistant
- Answer/CaII: Single tap the CTC on either earbud to answer an incoming call
- Reject Call: Double tap the CTC on either earbud to reject incoming calls
- Hang up Call – Double tap the CTC on either earbud to hang up on going calls
- Play/Pause Music: Via the In-Ear Detection feature
- Next Track: When playing music, double tap the right CTC to skip to the next song
- previous Track: When playing music, double tap the left CTC to return to the previous song
- Volume: When playing music. volume can be changed by upward or downward swipe gesture on either CTC.
IN-EAR DETECTION
You can play/pause a song via the in-ear detection feature. Place the earbuds inside the ear to play a song; just take them out to pause one.
- Initially the user needs to play music manually via the phone just after connection
- After disconnection, or after one or both earbuds timeout, it is necessary to manually open the music player to play
- If you take out one earbud, then the music can be restored if you plug it back in within 45 minutes; on the other hand if you take out both earbuds then the response time for the same is 4 minutes
- During the process of playing music when both earbuds are plugged in, if one earbud is taken out then the music pauses in both the earbuds even if the other earbud is kept plugged in. If one wants the other earbud to play music, one needs to take out that earbud and plug it again inside the ear.
Common Problem With Solution
Troubleshooting
potential Problem | Solution |
If one earbud is not working | perform the factory reset |
If earbuds are not connection/scan mode | perform the factory reset |
If earbuds disconnect during phone call | Charge the earbuds or perform the factory reset |
If there are other exceptions is usage | Place the earbuds back into the charging case and try using them again or perform the factory reset |
If the In-ear detection or touch controls don’t seem to respond | After long usage, residual stains and perspiration can affect the in-ear detection area use a clean cloth to wipe those areas softly |
Specifications
Bluetooth version | V5.0 |
Water resistance | IPX7 |
IWP technology | Yes |
In-ear detection | Yes |
Dual microphones | Yes (Equipped with ENx technology for environmental noise cancellation) |
Music playtime | Up to 5H per charge; up to 20H additional with case |
Charging technology | ASAP fast charge |
Standby time | 100H |
Transmission range | 10m |
Driver size | 10mm*2 |
Bluetooth profiles | HFP/HSP/A2DP/AVRCP |
Pairing type | Google fast pair/standard pairing |
Supported codec | AAC / SBC |
Frequency | 20Hz-20kHz |
Battery | 600mAh (case) 60mAh*2 (earbuds) |
Charging time | 45Min for earbuds, 2-3H for case |
Charging interface | Type C |
Source
- https://www.boat-lifestyle.com/
- Download User Manual – Download
- Product Page – Click Here
Read More
- Boat Rockerz 255 Pro Bluetooth Earphones User Manual
- boAt Rockerz 450 Pro Bluetooth Headphones User Manual
- boAt Nirvanaa 751 ANC Bluetooth Headphones User Manual
- BOAT Airdopes 173 Wireless Earbuds User Manual
- Boat Rockerz 510 Bluetooth Headphones User Manual
- boAt Airdopes 121 V2 Wireless Earbuds User Manual
- BoAt Airdopes 381 Ear Wireless Earbuds User Manual
- Boat Rockerz 330 Bluetooth Headphones User Manual
- Boat Rockerz 255 Wireless Earphones User Manual
Frequently Asked Question
Perform the Factory Reset in case you face any difficulty while operating your Airdopes 451 v2
NOTE: Before performing reset, clear “Airdopes 451 v2” from pairing device history by forgetting device.
Step I: Place both the earbuds back inside the charging case in correct orientation.
Step 2: Long press the Reset Button on the case for up to I O seconds to do Factory reset, which is indicated by the flashing of white LED three times
Step 3: Shut the lid of the charging case and then re-open it again
Step 4: Once you take the earbuds out from the charging case, they automatically
Step 5: Congratulations! Your Airdopes 451v2 has been Reset.
1. To switch the earbuds on (Smart Power On) simply open the lid of the charging case (when earbuds are inside). IWP'” (Insta Wake N’ Pair) Technology enables the earbuds to power on automatically, get connected and enter into the connection mode OR Long touch the CTC on both earbuds for 2 seconds to manually power on the earbuds. The led flashes in blue for 1 second
2. turn on your bluetooth of your iphone or android phone.
3. now the boat 451v2 airdopes will visible in your phone’s bluetooth setting. just tap to connect.