This post is all about Corsair HS60 Pro Surround Gaming Headset Quick Start Guide. Here you will find information about Corsair HS60 Pro Surround Gaming Headphone manual.
Corsair HS60 Pro Surround Gaming Headset Quick Start Guide
Contents, Controls and Feature
- CORSAIR HS60 PRO SURROUND headset
- 7.1 Surround sound USB adapter
- Detachable microphone boom
- Mute button Volume control
- Headband adjustment
The HS60 PRO SURROUND is a multi-platform headset that operates in two audio modes: Stereo and
7.1 surround sound. In stereo mode, you can connect the 3.5mm jack into any PC, Mac, PlayStation 4, XBOX One*, Nintendo Switch or mobile device.
The included 7.1 surround sound USB adapter enables virtual 7.1 surround sound on PC.
Remember that powering the 7.1 surround sound USB adapter requires a high power (USB 2.0 or better) port. Some USB ports on older keyboards and monitors do not support high-power devices.
Place the headset on your head and adjust the headband for a comfortable fit.
The plush memory foam ear pads enable the HS60 PRO SURROUND headset to fit comfortably so you can play for hours without fatigue.
*May require Microsoft adapter sold separately.
Go to corsair.com/support/downloads to download the CORSAIR iCUE software.
Using iCUE software will enable the full feature set of the HS60 PRO SURROUND headset. The 7.1 surround sound USB adapter must be connected to your PC to use iCUE software.
Note: If the headset is used without software, some features will be disabled.
- Install the iCUE software on a PC running Windows 7, Windows 8.1, Windows 10 or later.
- After installation is complete, reboot your PC, and launch iCUE.
iCUE software can be used to:
- Select and customize audio equalizer (EQ) settings.
- Adjust microphone input volume.
- Set 7.1 surround sound on or off.
The software’s built-in documentation explains how to use the HS60 PRO SURROUND’s features in greater detail.
Download the CORSAIR iCUE software from corsair.com/support/downloads.
Don’t be afraid to use the software equalizer to adjust the audio quality to your liking. EQ presets have been provided for popular gaming and media types.
Prolonged listening at high volumes may adversely affect your hearing. Take breaks between sessions and always begin with the volume at the lowest possible level before increasing.
As with any audio product, reduce the volume before trying it with an audio source the first time.
You can adjust the volume with:
- The volume controller on the headset at the bottom corner of your left earcup.
- The standard Windows audio controller can also be used to adjust volume.
- Once an audio source is playing, set the volume to a comfortable level.
Your new HS60 PRO SURROUND headset features a high performance “unidirectional” microphone designed to reject noise other than your voice, but it must be pointed directly at your mouth to function correctly. Bend the flexible microphone boom to best fit near to the left corner of your mouth.
We’ve found that about a 30 degree bend is a good place to start, but feel free to increase or decrease this if your mic is too loud or too soft.
Enjoy your HS60 PRO SURROUND headset! If you have any questions or comments, see the back panel of this guide for contact information.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.
WARNING: Changes or modifications not expressly approved by CORSAIR MEMORY, Inc could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet that is on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. CAN ICES-3(B)/NMB-3(B)