CREATIVE SXFI AIR GAMER Headphones User Manual Guide

In this user manual guide, we will review the CREATIVE SXFI AIR GAMER Headphones User Manual Guide. Let’s get started.

CREATIVE SXFI AIR GAMER Headphones User Manual Guide

CREATIVE SXFI AIR GAMER Headphones User Manual Guide
CREATIVE SXFI AIR GAMER Headphones User Manual Guide

OVERVIEW

CREATIVE SXFI AIR GAMER Headphones Overview
CREATIVE SXFI AIR GAMER Headphones Overview

Button overview

CREATIVE SXFI AIR GAMER Headphones Button Overview
CREATIVE SXFI AIR GAMER Headphones Button Overview

BLUETOOTH PAIRING / SOURCE SELECTION

Pairing a Bluetooth Device:

  • Press and hold for 2s to initiate Bluetooth Pairing mode. RGB Lighting will start blinking in blue. Press and hold for 2s again to exit Bluetooth Pairing mode
  • Select “Creative SXFI AIR GAMER” from the list of discovered Bluetooth devices to pair. RGB lighting will remain in static state once paired with a device

Voice Prompt: Now in Pairing Mode, Waiting for Connection

Note:

  • While in Bluetooth pairing mode, SXFI AIR GAMER will exit discovery mode if no device is paired within 5 mins

Removing Previously Paired Bluetooth Devices:

Press and hold for 8s until the RGB Lighting blinks twice in red. RGB Lighting will revert to default color once Bluetooth Reset is complete

Voice Prompt: Bluetooth Reset

Enabling Bluetooth Low Energy (BLE) Pairing:

  • The SXFI Control app is required to establish BLE connection in order to load your Super X-Fi profile onto Creative SXFI AIR GAMER
  • Press and hold for 2s to initiate Bluetooth Pairing mode

Selecting Input Source for Audio Playback:

Press the Bluetooth / Source button once to switch playback source in the following order:

Bluetooth / MicroSD Card / USB Audio / GamerChat

Voice Prompt: Bluetooth / MicroSD Card / USB Audio / GamerChat

Note:

  • Nintendo Switch works with Line-in mixed with other sources

DEVICE SETUP

Windows PC Setup

  1. Settings > System > Sound > Sound Control Panel > Playback Tab > SXFI AIR GAMER > Right Click and “Set as Default Device”
  2. Configure > Select “7.1 Surround” > Check all “Optional speakers” > Setup Complete

Mac Setup

  1. Audio Midi Setup > SXFI AIR GAMER > Output > Format > 8 ch 32-bit integer 96 kHz
  2. Click Configure Speakers > Configuration > Select “7.1 Rear Surround” > Click Apply > Setup Complete

CHARGING SXFI AIR GAMER

Creative SXFI AIR GAMER has a built-in battery for wireless audio playback that will last up to 11 hours per charge. When plugged into a power source, SXFI AIR GAMER’s built-in LED will light up in red. When the headset is turning on, the RGB Lighting will light up to indicate its current battery level.

Battery Level Indicator :

CREATIVE SXFI AIR GAMER Headphones User Battery Level Indicator
CREATIVE SXFI AIR GAMER Headphones User Battery Level Indicator

Note:

  • SXFI AIR GAMER will not power on when battery level is too low. Please charge the headset immediately when battery level is low to prevent battery degradation
  • SXFI AIR GAMER will power off automatically after 10 minutes of inactivity in the following modes: Bluetooth / Line-in / MicroSD Card
  • The headset will start charging when connected via USB to a power source except in the following modes: USB mode / Mass Storage mode
  • For added convenience, battery level is also indicated in the mobile app when connected

TOUCHPAD GESTURES

Increase Volume

Swipe up to increase volume

Decrease Volume

  • Swipe down to decrease volume

Note: SXFI AIR GAMER will play a tone at max / min volume

Previous Track

  • Swipe left to return to previous track

Next Track

  • Swipe right to skip to next track

Call Panning Function:

  • Swipe left / right while on a call to activate Call Panning
  • Default Call Direction: Center
  • Cycle Sequence (Swipe Left): Right > Center > Left
  • Cycle Sequence (Swipe Right): Left > Center > Right

Initiating Voice Assistant:

  • Tap and hold for 2s to initiate voice assistant

Incoming Voice Calls:

  • Tap twice to answer incoming voice call
  • Tap twice again to end voice call

Initiating Audio Playback:

  • Tap twice to continue audio playback from selected input source
  • Tap twice again to pause audio playback from selected input source

Mass Storage Mode:

  • Tap and hold with two fingers for 4s to enter Mass Storage mode
    • Tap and hold with two fingers for 4s again to exit Mass Storage mode

Note: It takes 15s to enable / disable Mass Storage mode. The headset will play two short beeps when enabling / disabling the mode

Shuffle Mode:

  • Tap once to shuffle music playback

Voice Prompt: Shuffle On / Shuffle Off

Note:

  • Ensure that SXFI AIR GAMER is connected to a Bluetooth-enabled device before attempting the gestures
  • Shuffle mode is only available in MicroSD card playback

GAMERCHAT

GamerChat is a function that allows users to simultaneously chat with friends via Bluetooth while playing games when the headset is connected to a USB source. GamerChat requires Super X-Fi to be turned on as well as both Bluetooth and USB audio to be connected at the same time to work.

GamerChat’s Audio Layout

CREATIVE SXFI AIR GAMER Headphones Gamerchat
CREATIVE SXFI AIR GAMER Headphones Gamerchat

Note:

  • Super X-Fi cannot be turned off while using GamerChat. Ensure that Super X-Fi is enabled when in GamerChat mode
  • Both Bluetooth and USB audio’s volumes can only be controlled via its respective original audio source
  • Ensure that Creative SXFI AIR GAMER is connected to both Bluetooth and USB audio before using GamerChat
  • For more information on GamerChat, visit creative.com/sxfiairgamer

FACTORY RESET

Factory reset is reserved for scenarios where users encounter problems such as Bluetooth pairing problems or other connectivity issues. Follow the steps below to reset your SXFI AIR GAMER:

  • Press the and simultaneously for 5s until RGB Lighting blinks twice in red
  • RGB Lighting will revert to default color once Factory Reset is complete
  • Alternatively, Factory Reset can also be triggered via SXFI Control software or SXFI AIR Control app

Voice prompt: Reset to Factory Default

SUPER X-FI PERSONALIZATION

Unleash the performance of Super X-Fi with SXFI App. The app allows you to personalize your Super X-Fi profile through an advanced Head & Ear-Mapping process for a complete Super X-Fi experience.

Download SXFI App from: iOS app store or google play store.

AUDIO & RGB LIGHT CUSTOMIZATION

Download SXFI Control for PC / Mac or SXFI AIR Control for mobile devices to unlock the headset’s full potential with Super X-Fi profile personalization, Graphic Equalizer and RGB Light customization.

Download SXFI Control for PC / Mac from:

creative.com/support/sxfiairgamer                  Mac App Store

Download SXFI AIR Control for mobile devices from:

iOS App Store                   Google Play Store

TECHNICAL SPECIFICATIONS

Headphone

  • Driver: 50 mm Neodymium magnet
  • Frequency response: 20–20,000 Hz
  • Impedance: 32Ω
  • Sensitivity: 114 dB / mW @ 1 kHz
  • USB input: 5V

Microphone (CommanderMic)

  • Type: Unidirectional noise-reduction
  • Frequency response: 100–16,000 Hz
  • Impedance: < 2.2 kΩ
  • Sensitivity: -42 dB @ 1 kHz

Microphone (NanoBoom)

  • Type: Unidirectional noise-reduction
  • Frequency response: 100–8,000 Hz
  • Impedance: < 2.2 kΩ
  • Sensitivity: -38 dB @ 1 kHz

Operating Frequency: 2402–2480 MHz

Wireless Type: Bluetooth 5.0

Bluetooth Profiles:

  • A2DP (Wireless stereo Bluetooth)
  • AVRCP (Bluetooth remote control)

• HFP (Hands-free profile)

Input: 5V 1A

RF Output Power: < 4 dBm Operating temperature: 0–45°C Wireless Range: Up to 10m / 33 ft Charging Time: 2.5 hrs

Play Time: Up to 11 hrs playback time

Audio Codec: SBCLithium Ion Battery: 3.7V 1300 mAh (4.81 Wh)

Note: Compliance markings are located on the surface upon removal of ear cup cushion which can be removed by hand

OTHER INFORMATION

Please visit creative.com/support/sxfiairgamer for the user guide, safety and regulatory information and battery removal instruction, which is meant strictly for independently qualified professional.

Product Registration

Registering your product ensures you receive the most appropriate service and product support available. You can register your product at creative.com/register.

Source

Read More

Leave a Comment