Dan Clark Audio Stealth Quick Start Guide

Dan Clark Audio Stealth Quick Start Guide : Let’s open the box for user manual guide of Dan Clark Audio Stealth.

Dan Clark Audio Stealth Quick Start Guide

Dan Clark Audio Stealth Quick Start Guide
Dan Clark Audio Stealth Quick Start Guide

Features

  • Driver: 51mm * 76mm Dan Clark Audio designed single-ended planer magnetic.
  • Titanium “Memory Metal” headband.
  • Auto-adjusting Comfort Strap.
  • 415 grams.
  • THD less than 0.02% measured 1kHz @94dB
  • Japanese synthetic protein leather.
  • RMS Deviation of 2.5dB from 20Hz-10kHz

Safety Instructions

  • Read instructions manual carefully and completely before using the headphone.
  • Keep the headphone, accessories, and packing out of reach of pets and children. This product contains small parts which may present a choking hazard.
  • Use only attachments, accessories, and spare supplied or recommended by Dan Clark Audio.
  • Protect your hearing from high volume levels. Permanent hearing damage can occur when headphones are used at high volume levels for extended periods of time.
  • Do not expose headphone or accessories to extreme temperatures.
  • Always keep headphone dry.

Attaching A Cable

All Dan Clark Audio planer-magnetic products use push-pull self-latching connectors. To attach your cable hold the male connector by the boot and rotate it into the female receptacle on the headphone until you feel it click into place. To release the cable, pull down on the top of the connector’s metal jacket.

Dan Clark Audio Stealth Attaching A Cable
Dan Clark Audio Stealth Attaching A Cable

Product Care

  • The synthetic protein leather ear pads may be cleaned gently with a moistened cloth. Do not cleaner or protectants, this may damage the pad.
  • Clean any other surfaces with a clean, dry and lint-free microfiber cloth.
  • For the first 50-100 hours of use the headphone will ‘burn-in’, during this time the sound signature will stabilize.

Storing The Headphones

Step 1: Grip firmly around both sides of the headphone with one hand an shown

Step 2: Grasp headphone headband wire with your other hand.

Step 3: Push down on the headband wire while firmly holding both sides of the headphone with other hand. This will cause the headphone to fold in a controller manner.

Step 4: Place headphones into the case as shown.

Dan Clark Audio Stealth Storing The Headphones
Dan Clark Audio Stealth Storing The Headphones

Source

Read More

Leave a Comment