HyperX Cloud Flight S Wireless Gaming Headset User Manual

In this user manual, we will explore the HyperX Cloud Flight S Wireless Gaming Headset User Manual.

HyperX Cloud Flight S Wireless Gaming Headset User Manual

HyperX Cloud Flight S Wireless Gaming Headset User Manual
HyperX Cloud Flight S Wireless Gaming Headset User Manual

Specifications

Headphone

DriverDynamic, 50mm with neodymium magnets
TypeCircumaural, Closed back
Frequency response10Hz–20kHz
Impedance32 Ω
Sound pressure level99.5dBSPL/mW at 1kHz
T.H.D.< 1%
Weight310g
Weight with mic320g
Cable length and typeUSB charge cable (1m)

Microphone

ElementElectret condenser microphone
Polar patternBi-directional, Noise-cancelling
Frequency response50Hz-18kHz
Sensitivity-40.5dBV (1V/Pa at 1kHz)

Battery life*: 30 hours

Wireless Range**: 2.4 GHz, Up to 20 meters

  • *Tested at 50% headphone volume
  • **Wireless range may vary due to environmental conditions

Overview

A. Up button – Mic monitoring toggle
B. Left button – Game balance
C. Right button – Chat balance
D. Down button – Mic mute toggle
E. Microphone port
F. USB charge port
G. Status LED
H. Power button
I. 7.1 Surround Sound button
J. Volume wheel
K. Detachable microphone
L. Microphone mute LED
M. USB adapter
N. Wireless pairing pin hole
O. Wireless status LED
P. USB charge cable

HyperX Cloud Flight S Wireless Gaming Headset Overview
HyperX Cloud Flight S Wireless Gaming Headset Overview

Setting up with PC

  1. Connect the wireless USB adapter to the PC.
  2. Power on the headset.
  3. Right click speaker icon > Select Open Sound settings > Select Sound Control Panel.
  4. Under the Playback tab, click on “HyperX Cloud Flight S Chat”. Then click on the down arrow next to Set Default and select Default Communication Device.
  5. Click on “HyperX Cloud Flight S Game”. Then click on the down arrow next to Set Default and select Default Device.
  6. Right click on “HyperX Cloud Flight S Game” and click on Configure Speakers.
  7. Select 7.1 Surround as the speaker configuration and click next.
  8. Under the Recording tab, click on “HyperX Cloud Flight S Chat” and click on the Set Default button.
  9. Under the Playback tab, verify that “HyperX Cloud Flight S Game” is set as Default Device and “HyperX Cloud Flight S Chat” is set as Default Communication Device. Under the Recording tab, verify that “HyperX Cloud Flight S Chat” is set as Default Device.
HyperX Cloud Flight S Wireless Gaming Headset Setting up with PC
HyperX Cloud Flight S Wireless Gaming Headset Setting up with PC

Setting up with Discord

  1. In Discord settings, select Voice & Video.
  2. Under Voice Settings, set Input Device to “Microphone (HyperX Cloud Flight S Chat)”.
  3. Set Output Device to “Headset Earphone (HyperX Cloud Flight S Chat)”.

Setting up with PlayStation 4

  1. Set Input Device to USB Headset (HyperX Cloud Flight S).
  2. Set Output Device to USB Headset (HyperX Cloud Flight S).
  3. Set Output to Headphones to All Audio.
  4. Set Volume Control (Headphones) to maximum.

Controls

Mic monitoring toggle: Press to toggle mic monitoring on/off.

Game/Chat balance: Press to adjust mix between game audio and chat audio. The game/chat balance functionality operates independently from the overall headset audio volume. Game/chat balance function is unavailable when using headset on PlayStation 4.

Microphone mute toggle

Press to toggle microphone mute on/off. The microphone mute LED will indicate the current mute status.

Microphone Mute LEDMute Status
RedMute on
OffMute off

Status LED

StatusBattery LevelLED
PairingFlash green and red every 0.5s
SearchingSlow breathing green
Connected90% – 100%
15% – 90%
< 15%
Solid green
Blinking green
Blinking red

Power button: Hold for 3 seconds to power the headset on/off.

7.1 Surround Sound*

Press to toggle 7.1 Surround Sound on/off.

Virtual 7.1 surround sound outputs as a 2 channel stereo signal to be used with stereo headphones.

Volume Wheel: Scroll up and down to adjust volume level.

WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time.

HyperX Cloud Flight S Wireless Gaming Headset Controls
HyperX Cloud Flight S Wireless Gaming Headset Controls

Charging the Headset

It is recommended to fully charge your headset before first use.

When charging the headset, the headset status LED will indicate the current charge status.

Status LEDCharge Status
Solid greenFully charged
Breathing green15% – 99% battery level
Breathing red< 15% battery level

Qi wireless charging: To charge the headset via Qi wireless, place the left earcup onto a Qi wireless charging base.

Wired charging: To charge the headset via wired, plug the headset to a USB port with the USB charge cable.

HyperX NGENUITY Software

To customize EQ profiles, programmable buttons, and check battery status, download the HyperX NGENUITY software at: hyperxgaming.com/ngenuity

Questions or Setup Issues?

Contact the HyperX support team at: hyperxgaming.com/support/

Read More

Leave a Comment