JLAB Epic Air ANC True Wireless Earbuds User Manual

JLAB Epic Air ANC True Wireless Earbuds User Manual : JLAB is a reputed brand. So here we are going review the JLAB Epic Air ANC earbuds user manual.

Join Us on Telegram : Click Here

JLAB Epic Air ANC True Wireless Earbuds User Manual

YOUR WARRANTY

All warranty claims are subject to JLab Audio authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.

CONTACT US

Reach out to us at [email protected]
or visit jlabaudio.com/contact

FIRST TIME SETUP

1.AUTO-CONNECTING EARBUDS

A. Take earbuds out of the charging case and remove stickers.

B. Press and hold 3+ seconds on each earbud. Blinking blue and white light on one earbud will indicate ready to pair to your device.

2.CONNECTING BLUETOOTH

Select “JLab Epic Air ANC” in your device settings. Voice prompt “Bluetooth connected” followed by solid white lights will indicate you are connected.

ADDING NEW / ADDITIONAL BLUETOOTH DEVICES:

Turn OFF Bluetooth from any previously connected device. Turn ON Bluetooth from new device. Take earbuds out of the case.
Earbuds will automatically enter Bluetooth Pairing. Select “JLab Epic Air ANC” in new device settings to connect.

CONTROLS

VOLUME DOWN: Single tap

VOLUME UP: Single tap

SIRI (iOS) or “OK GOOGLE” (ANDROID): Double tap

PLAY / PAUSE: Double tap

BE AWARE / ANC ON / ANC OFF: Press & hold 1+ sec

TRACK FORWARD: Press & hold 1+ sec

EQ CHANGE: Triple tap

EQ CHANGE: Triple tap

ANSWER: Single Tap Left or Right

HANG UP: Double Tap Left or Right

REJECT INCOMING CALL: Double Tap and hold 1+ seconds Left or Right

MUSIC / MOVIE MODE: Press and hold both touch sensors simultaneously 3+ seconds.

POWER OFF WITHOUT CHARGING CASE: Turn off your Bluetooth from your device settings. The earbuds will then power off after 3 minutes.

VOICE PROMPTS

“Hello”: Power ON

“Ready to Pair”: Epic Air ANC is ready to pair to your Bluetooth device

“Be Aware”: Hear your surroundings

“ANC ON”: Noise canceling ON

“ANC ON”: Noise canceling OFF

“Bluetooth Connected”: Earbud is connected to device

“Battery Full”: 100-75%

“Battery Medium”: 75-25%

“Low Battery”: Less than 25% (When power decreases to 10%, “Low Battery” will play one time)

“Goodbye”: Power OFF

EQUALIZER MODES

Triple tap either earbud for different EQ settings. Voice prompts will indicate EQ settings (Epic Air ANC will cycle 4 EQ settings) Customize each EQ setting by downloading the JLab Air ANC App in Apple/Google Play Store

AUTO-POWER ON/OFF

1. Placing the earbuds in the charging case will power OFF earbuds and start charging. Blue lights indicate earbuds are charging and will turn off when fully charged.
2. When taken out of the charging case, they will auto power ON and connect.

WIRED CHARGING

Connect the Epic Air ANC to computer or USB 5V 1A (or less) output device.

WIRELESS CHARGING

FITTING

TROUBLESHOOTING

NO AUDIO IN ONE EARBUD OR EARBUDS ARE DISCONNECTED (MANUAL RESET)

1. Enter your Bluetooth device settings and forget the JLab Epic Air ANC. Fig A
2. Keep the earbuds in the charging case and on ONE earbud quickly tap the touch sensor 7x times. Light blinks blue 3 times. Fig C
3. Repeat with other earbud. Quickly tap the touch sensor 7x times. Light blinks blue 3 times. Fig C
4. Take both earbuds out of the charging case. Wait for one earbud to turn solid white and one to blink blue/white. You are now ready to pair to your Bluetooth device.

BLUETOOTH DEVICE DOES NOT CONNECT/RECONNECT

1. Enter your Bluetooth device settings and forget the JLab Epic Air ANC. Fig A
2. Turn OFF then ON Bluetooth. Fig B
3. Take the earbuds out of the case. Wait for one to turn solid white and one to blinking blue/white.
4. Select “JLab Epic Air ANC” in device settings to reconnect.

Instructional videos at: JLABAUDIO.COM/MANUALS

QUICK TIPS

• The left or right earbud can be used independently for music and phone calls. Simply choose one and take out from the case to connect.
• Only ONE Bluetooth device can be connected at a time. Turn off Bluetooth on unwanted devices and turn on Bluetooth on chosen device to connect.
• Fully dry off earbuds before putting in the charging case to avoid any damage to the case.

WARNING

Fully dry off the earbuds before placing in the charging case.

If the earbuds are damp or wet, this will cause damage to the charging case. The warranty will
be voided if the charging case shows damage by water/sweat.

CAUTIONS

• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing the earbuds.
• Wax may build up in the earbud tips, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
• If you experience regular discomfort while using this product, discontinue use and consult your physician.
• We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in safe location when not in use.

Source

• https://www.jlab.com/
• Download User Manual – Download
• Product Page – Click Here

Read More :

• JLab Jbuds Pro Wireless Signature Earbuds User Manual
• JLab Jbuddies Studio Wireless Kids Headphones User Manual
• JLAB STUDIO PRO WIRELESS OVER-EAR HEADPHONES User Manual
• JLAB Studio Pro ANC Over Ear Wireless Headphones User Manual
• JLAB EPIC AIR SPORT ANC TRUE WIRELESS EARBUDS User Manual
• JLAB PLAY GAMING WIRELESS EARBUDS User Manual
• JLAB STUDIO PRO OVER-EAR HEADPHONES User Manual
• JLAB Go Work Wireless On Ear Headset User Manual