JLab JBuddies Play Gaming Wireless Kids Headset User Manual

JLab JBuddies Play Gaming Wireless Kids Headset User Manual : This is for Kids in Gaming section. Let’s look at the manual for this.

JLab JBuddies Play Gaming Wireless Kids Headset User Manual

JLab JBuddies Play Gaming Wireless Kids Headset User Manual
JLab JBuddies Play Gaming Wireless Kids Headset User Manual

BLUETOOTH PAIRING

JLab JBuddies Play Gaming Wireless Kids Headset BLUETOOTH PAIRING
JLab JBuddies Play Gaming Wireless Kids Headset BLUETOOTH PAIRING

CHARGING

Connect to computer or USB 5V (or less) output device.

JLab JBuddies Play Gaming Wireless Kids Headset CHARGING
JLab JBuddies Play Gaming Wireless Kids Headset CHARGING

BUTTON FUNCTIONS

JLab JBuddies Play Gaming Wireless Kids Headset BUTTON FUNCTIONS
JLab JBuddies Play Gaming Wireless Kids Headset BUTTON FUNCTIONS

VOICE PROMPTS

“HELLO” = Power is ON.

“READY TO PAIR” = JLab Play headphones are ready to connect to your Bluetooth device.

“YOU’RE CONNECTED” = JLab Play headphones are connected to your Bluetooth device and ready for use.

“GOODBYE” = Power turning OFF.

NOTES:

  • When using the AUX INPUT, the microphone and game volume will also be determined by your console settings. Adjust accordingly.
  • The boom microphone and mute function works in both Bluetooth and AUX INPUT modes.
  • The button functions on the headphone ear cup will only work in Bluetooth mode.

CONSOLE + MOBILE GAMING

JLab JBuddies Play Gaming Wireless Kids Headset CONSOLE + MOBILE GAMING
JLab JBuddies Play Gaming Wireless Kids Headset CONSOLE + MOBILE GAMING

PC / MAC SETUP IF CONNECTED TO BLUETOOTH

SETUP with PC (Windows 7, 8, or 10):

  1. From the Start Menu, select the Control Panel.
  2. Select Hardware and Sound category.
  3. Select the Sound category.
  4. The Playback tab should show JLab Play Gaming Headphones connected as the Default Device.
  5. Click the next tab that says Recording.
  6. Right click the JLab Play Gaming Headphones icon and select “Set as Default Device”.
  7. Click OK box to save changes.

SETUP with MAC (macOS 10.1 and higher):

  1. Open System Preferences and select the Sound icon.
  2. Select the Input tab and select “JLab Play”.
  3. Select Output tab and select “JLab Play”.
  4. From this screen, set the Output volume to desired level.
  5. Closing out of the window will save settings.

YOUR WARRANTY

All warranty claims are subject to JLab Audio authorization and at our sole discretion. Retain your
proof of purchase to ensure warranty coverage.

CONTACT US

Reach out to us at [email protected] or visit jlabaudio.com/contact

Source

Read More

Leave a Comment