If you are searching for JLab JBuds Air Sport True Wireless Earbuds User Manual then you are at the right place.
JLab JBuds Air Sport True Wireless Earbuds User Manual
FIRST TIME SETUP
- AUTO-CONNECTING EARBUDS
A. Take earbuds out of the charging case and remove stickers.
B. Press and hold both touch sensors 3+ seconds to turn ON. One earbud turns solid white and the other earbud blinks blue/white indicating ready to pair to your device.
2. CONNECTING TO BLUETOOTH: Select “JLab JBuds Air Sport” in your device settings. Voice prompt “Bluetooth connected” followed by solid white lights will indicate you are connected.
ADDING NEW / ADDITIONAL BLUETOOTH DEVICES: Turn OFF Bluetooth from any previously connected device. Turn ON Bluetooth from new device. Take earbuds out of the case.
Earbuds will automatically enter Bluetooth Pairing. Select “JLab JBuds Air Sport” in device settings to connect.
IN THE BOX
BUTTON FUNCTIONS
TURN OFF EARBUDS WITHOUT CHARGING CASE: Enter your Bluetooth device settings and disconnect the JBuds Air Sport. Earbuds will power OFF after 3 minutes.
VOICE PROMPTS
“Hello”: Power ON.
“Ready to Pair”: JBuds Air Sport are ready to pair to Bluetooth device.
“Bluetooth Connected”: Earbud is connected to device.
“Battery Full”: 100-80%.
“Battery Medium”: 80-20%.
“Low Battery”: Less than 20% When power decreases to 10%, “Low Battery” will play.
“Goodbye”: Power OFF,
EQUALIZER MODES
Triple tap left earbud for different EQ settings. Voice prompts will indicate EQ settings (JBuds Air Sport will cycle 3 EQ settings)
CHARGING EARBUDS
- Placing the earbuds in the charging case will power off earbuds and start charging. Blue lights indicate earbuds are charging and will turn off when fully charged.
- When earbuds are taken out of the case, they will auto power on and reconnect to your device.
CHARGING CASE
Connect the JBuds Air Sport to computer or USB 5V 1A (or less) output device.
FITTING
TROUBLESHOOTING
NO AUDIO IN LEFT EARBUD OR EARBUDS DISCONNECT FROM EACH OTHER (MANUAL RESET)
- Enter your Bluetooth device settings and forget the JBuds Air Sport.
- Open the charging case door and leave both earbuds inside. Starting with ONE earbud, quickly tap the touch sensor 7x times. Light will blink blue 3x times. Leave the earbuds in the charging case.
- Repeat with the other earbud. Quickly tap the touch sensor 7x times. Light will blink blue 3x times.
- Take both earbuds out of the charging case and keep them within 2 inches from each other. Wait for one earbud to turn solid white and the other to blink blue/white. You are now ready to pair to your Bluetooth device.
BLUETOOTH DEVICE DOES NOT CONNECT/RECONNECT
- Enter your Bluetooth device settings and forget the JBuds Air Sport.
- Turn OFF then ON Bluetooth.
- Take the earbuds out of the case. Wait for one to turn solid white and the other to blink blue/white.
- Select “JLab JBuds Air Sport” in device settings to reconnect.
QUICK TIPS
- Fully dry off the earbuds before putting in the charging case.
- The left or right earbud can be used independently for music and phone calls. Simply choose one and take out of the case to connect.
- Choosing the correct ear tip makes a significant improvement in audio quality due to the proper seal for the driver. Test all ear tips for best results.
- Only ONE Bluetooth device can be connected at a time. Turn off Bluetooth on unwanted devices and turn on Bluetooth on chosen device to connect.
Source
- https://intl.jlab.com/
- Download User Manual – Download
- Product Page – Click Here
Read More