If you are searching for JVC HA A9T In Ear Headphones User Manual in this user manual guide. Let’s check this.
JVC HA A9T In Ear Headphones User Manual
Specifications
BLUETOOTH
| Standard | BLUETOOTH v5.1 |
| Frequency range | 2.402 GHz – 2.480 GHz |
| Output power | Power Class 1 |
| Max. communication distance | Approx. 10 m (33 ft) * |
| Profiles | A2DP/AVRCP/HFP |
| Codecs | SBC |
| Frequency response during A2DP | 20 Hz – 20,000 Hz |
| Supported content protection | SCMS-T |
- The communication distance is just an estimate. The sound may be choppy and the communication distance may be shorten depending on the surrounding environment.
Note: This system can register the pairing information of up to 7 BLUETOOTH devices. When the 8th device is paired, the pairing information of the new device will overwrite the information of the oldest registered device.
Power supply/General
| Power supply | Built-in lithium-ion rechargeable battery |
| Battery life | Approx. 7.5 hours (earphone) / Approx. 30 hours (earphone + charging case) (Depends on usage conditions.) |
| Charging time | Approx. 2 hours (earphones) Approx. 3.5 hours (charging case) |
| Operating temperature range | 5 °C (41 °F) to 40 °C (104 °F) |
| Charging temperature range | 5 °C (41 °F) to 35 °C (95 °F) |
| Water-resistant performance | IPX5 (earphones) |
| Mass | Approx. 4.1 g (one earphone) / approx. 41 g (charging case) (including built-in lithium-ion rechargeable battery) |
| Accessories | Charging caseCharging cableEar piece (S, M and L; 2 pcs each) |
Note: Designs and specifications are subject to change without notice.
Charging
Before using, charge the charging case and earphones.
Charging the charging case
- When using a commercially available USB conversion AC adapter, make sure to choose one with an output voltage of DC 5 V and output current of 1 A and above. Otherwise, it may result in malfunction or abnormal heating.
- Use only the supplied charging cable for charging.
- Using the supplied charging cable, connect the charging case and a commercially available USB conversion adapter.
- Connect the charging cable provided to start charging.
- Insert the USB AC adapter into the AC outlet to start charging.
- The indicators flash and light up, indicating that charging has started.
- The charging time for the charging case is approx. 3.5 hours.
Indicators on the charging case
During charging, the indicators light up and flash. When charging is complete, all indicators will light up.
Note
- After charging is complete, unplug the USB charging cable.
- The charging case may stop charging if the temperature exceeds the charging temperature range (5 °C (41 °F) to 35 °C (95 °F)). (All the indicators on the charging case will turn off.) Charging will resume automatically in an environment where the temperature is back within the charging temperature range.
- To prevent deterioration of the battery, charge the charging case once every 6 months when it has not been used for a long period of time.
- When charging the charging case that has not been used for a long period of time, it might take some time for the indicators to light up or flash. Wait for the indicators to light up or flash.
Charging the earphones
- Open the charging case.
- Remove the insulation sheet before charging.
- Insert the L and R earphones correctly and firmly into the charging case.
- Check that the indicators light up.
- During charging, the indicators on the earphones will light up. When charging is complete, all indicators will turn off. When the earphones are inserted in the charging case, the indicators on the charging case will light up for a few seconds to indicate the remaining power of the charging case. When the indicators on the charging case do not light up, it shows that the charging case is not fully charged. Charge the charging case. Charging the charging case
- The charging time for the earphones is approx. 2 hours.
Note
- After the earphones are inserted into the charging case, the power of the earphones will automatically turn off.
- When the charging case is fully charged, it can be used to recharge the earphones fully up to 2 times.
- The earphones may stop charging if the temperature exceeds the charging temperature range (5 °C (41 °F) to 35 °C (95 °F)). (All the indicators will flash.) In such a case, remove the earphones and then re-insert to resume charging in an environment within the charging temperature range.
- Depending on the BLUETOOTH device connected, the remaining battery power of the earphones will be displayed but this may not be accurate. Use it as a guide.
- To prevent deterioration of the battery, charge the earphones once every 6 months when the earphones have not been used for a long period of time.
- When charging the earphones that have not been used for a long period of time, it might take some time for the indicators to light up. Wait for the indicators to light up.
Maintaining the charging terminals
When the charging terminals are dirty or dusty, it may affect the charging performance. Gently wipe the charging terminals regularly with cotton swab.
Connecting (Power On)
It is necessary to pair (device registration) the System with your BLUETOOTH device before using the System to listen to music and make a call.
Pairing (Registering a device)
Pairing for the First Time
Pair with the earphones taken out from the charging case.
1. Take out both the L (left) and R (right) earphones.
- Be careful not to touch the touch sensor area when taking them out.
- After the earphones are taken out, the L and R indicators will flash, and the power turns on automatically.
- After a short while, both L and R indicators start to flash quickly and repeatedly, and a voice message saying “Pairing” can be heard.
Note
- When there is an interval between the timing when the L and R earphones are taken out from the charging case, connection between them may fail. In this case, put the earphones back into the charging case, wait till their power goes off and repeat the steps again.
- Either the L or R earphone will be the base unit connecting to the BLUETOOTH device and the other earphone.
2. Turn on the Bluetooth function of the BLUETOOTH device.
3. Select “JVC HA-A9T” from the device list.
- After connection is established, both the L and R indicators will flash slowly, and the earphones can now be used for listening to music.
Note
- During the pairing process, the BLUETOOTH device may require input of a PIN code. In such a case, enter “0000” as the PIN code for the System.
- If connection (pairing) is not completed within 5 minutes after the indicator starts flashing, the earphone automatically turns itself off.
Pairing earphones when they are not inside the charging case.
- While the power is turned off, tap and hold the touch sensor on both the L (left) and R (right) earphones for about 3 seconds.
- The power of the L and R earphones turns on. When both L and R indicators start to flash quickly and repeatedly (or when a voice message saying “Pairing” is heard), release your fingers from the buttons.
- Turn on the Bluetooth function of the BLUETOOTH device.
- Select “JVC HA-A9T” from the device list.
- After connection is established, both the L and R indicators will flash slowly, and the earphones can now be used for listening to music.
Note
- During the pairing process, the BLUETOOTH device may require input of a PIN code. In such a case, enter “0000” as the PIN code for the System.
- If connection (pairing) is not completed within 5 minutes after the indicator starts flashing, the earphone automatically turns itself off.
Pairing the Second and Subsequent Devices
Pairing with the earphones taken out from the charging case.
1. Turn off the Bluetooth function of the device that was last paired.
2. Take out both the L (left) and R (right) earphones.
- Be careful not to touch the touch sensor area when taking them out.
- After the earphones are taken out, the L and R indicators will flash, and the power turns on automatically.
- After a short while, indicators for both L and R earphones start to flash quickly and repeatedly, and a voice message saying “Pairing” can be heard.
Note: When there is an interval between the timing when the L and R earphones are taken out from the charging case, connection between them may fail. In this case, put the earphones back into the charging case, wait till their power goes off and repeat the steps again.
3. Turn on the Bluetooth function of the BLUETOOTH device.
4. Select “JVC HA-A9T” from the device list.
- After connection is established, both the L and R indicators will flash slowly, and the earphones can now be used for listening to music.
Note
- During the pairing process, the BLUETOOTH device may require input of a PIN code. In such a case, enter “0000” as the PIN code for the System.
- If connection (pairing) is not completed within 5 minutes after the indicator starts flashing, the earphone automatically turns itself off.
Pairing earphones when they are not inside the charging case.
- Turn off the Bluetooth function of the device that was last paired.
- While the power is turned off, touch and hold the touch sensor area of the L (left) earphone for about 5 seconds.
- When the power of the L earphone turns on and the L indicator starts to flash quickly and repeatedly (or when a voice message saying “Pairing” is heard), release your finger from the button.
- Turn on the Bluetooth function of the BLUETOOTH device.
- Select “JVC HA-A9T” from the device list.
- When the earphone is successfully connected to the device, the indicator starts to flash slowly.
6. Touch and hold the R (right) touch sensor area for about 3 seconds. Release your finger after the R indicator lights up. The R earphone turns on and gets connected to the L earphone.
- After connection between the L and R earphones is established, the indicator will flash slowly, and the earphones can now be used for listening to music.
Note
- If they are not connected, put the earphones back into the charging case, wait till their power goes off and repeat the steps again.
- If connection (pairing) is not completed within 5 minutes after the indicator starts flashing, the earphone automatically turns itself off.
Reconnect
Connecting to a device with the earphones taken out from the charging case.
Turn on the Bluetooth function on the device to connect, followed by taking both earphones from the charging case. The power of the earphones turns on automatically, and they are automatically reconnected with the last connected device.
- Be careful not to touch the touch sensor area when taking them out.
- If reconnection cannot be established, operate the BLUETOOTH device to connect.
- If connection is not established for more than 5 minutes, the power of the earphones automatically turn off.
Connecting a device when the earphones are not inside the charging case.
1. Check that the power of the earphones is off. Power Off
2. Turn on the Bluetooth function of the device to connect, followed by tapping and holding the touch sensor on both the L and R earphones at the same time for about 3 seconds.
- The indicator lights up for 1 second and the power turns on.
- The indicator flashes twice slowly and the unit automatically tries to establish connection with the last connected device.
- After connection is established, the L and R indicators continue to flash every 5 seconds.
- The earphones reconnect with the device that was last connected and can now be used for listening to music.
Note
- If reconnection cannot be established, operate the BLUETOOTH device to connect.
- If you cannot hear sounds from both earphones, it means that the L and R earphones are not connected. In this case, turn off the power of both the L and R earphones, followed by turning on their power again at the same time.
- Touching and holding the touch sensor area for about 5 seconds switches the indicators to flash quickly. If this occurs, turn off the power of the earphone and repeat the steps from the beginning. Power Off
- If connection is not established for more than 5 minutes, the power of the earphones automatically turn off.
Using only one earphone
After the BLUETOOTH function of the device to connect is turned on, one earphone can now be used on its own.
- Take out the earphone that you wish to use from the charging case. The power of the earphones turns on automatically, and they are automatically reconnected with the last connected device.
- Be careful not to touch the touch sensor area when taking them out.
Note
- For remote control operation, only the earphone that is in use can be used.
- To use the earphone that is not inside the charging case, touch the touch sensor area of the earphone for about 3 seconds to turn on the power.
- If pairing has not been performed, do so before using. Pairing (Registering a device)
- To use both earphones, put the earphones back into the charging case, wait till their power goes off and remove them from the case.
Audio / Phone
After the Bluetooth connection is established, the System can be used for listening to music and hands-free calling.
Audio operation
Wearing
- Identify the L and R sides of the earphones and put them on correctly.
- There is a semicircle raised bump on the L (left) side.
- Hold the earphones as illustrated in the diagram so as not to touch the touch sensor areas, and fit them into your ears.
- Adjust the position of the earphones to fit them into your ears.
- If the ear piece is not securely attached, it may slipped off when in use and remain in your ear. If the ear piece remains in your ear, be careful not to push it further into your ear.
Note
- he medium-size silicone ear pieces are attached when purchased.
- Choose an appropriate ear piece from the three sizes (S, M and L) to enhance your listening experience and for the best fit.
- Incorrect ear piece size can result in sound leakage and lack of bass.
- Check that the ear piece is securely attached as shown in the figure.
Remote control operation (when using both L and R earphones)
Launch the music player app on the BLUETOOTH device connected, to start playback.
| Play/Pause | Tap the L or R touch sensor area once quickly. |
| Volume adjustment | To raise the volume, tap the touch sensor area on the L earphone 3 times quickly. To lower the volume, tap the touch sensor area on the L earphone twice quickly. |
| Skip to the next track | During playback, tap the touch sensor area on the R earphone twice quickly. |
| Skip to the previous track or beginning of the current track | During playback tap the touch sensor area on the R earphone 3 times quickly. |
Remote control operation (when using only the L earphone)
Launch the music player app on the BLUETOOTH device connected, to start playback.
| Play/Pause | Tap the touch sensor area on the L earphone once quickly. |
| Volume adjustment | To raise the volume, tap the touch sensor area on the L earphone 3 times quickly. To lower the volume, tap the touch sensor area on the L earphone twice quickly. |
Remote control operation (when using only the R earphone)
Launch the music player app on the BLUETOOTH device connected, to start playback.
| Play/Pause | Tap the touch sensor area on the R earphone once quickly. |
| Volume adjustment | To raise the volume, tap the touch sensor area on the R earphone 3 times quickly. To lower the volume, tap the touch sensor area on the R earphone twice quickly. |
Note
- When the remaining battery power becomes low, a voice guidance will be heard on the earphone that had ran out of battery.
- When the remaining battery power becomes low, the power will turn off automatically from the earphone that had ran out of battery.
- When watching movies with the earphones, a slight time lag may occur in the audio output.
- We do not guarantee all operations of the BLUETOOTH device.
Phone operation
Remote control operation (when using both L and R earphones)
Identify the L and R sides of the earphones and put them on correctly. Wearing
The same operation can be performed by touching the touch sensor area of the L or R button (except the voice assistant function).
| Answering the call | Tap the touch sensor area once quickly when receiving the call. |
| Ending the call | Touch the touch sensor area for about 1 second during the call and release your finger when you hear a beep sound. |
| Rejecting a call | Touch the touch sensor area for about 1 second when receiving the call and release your finger once you hear a beep. |
| Switching between the earphones and the smartphone during a call | Tap the touch sensor area 4 times quickly during the call. |
| Using voice assistant function (Siri etc) | Touch the touch sensor area on the L earphone for about 1 second when not using the phone function, and release your finger once you hear a beep. |
Remote control operation (when using only the L earphone)
Check that the L earphone is fitted correctly in the left ear. Wearing
| Answering the call | Tap the touch sensor area on the L earphone once quickly. |
| Ending the call | Touch the touch sensor area of the L earphone for about 1 second during a call. Release your finger when you hear a beep sound. |
| Rejecting a call | Touch the touch sensor area of the L earphone for about 1 second when receiving a call. Release your finger when you hear a beep sound. |
| Switching between the earphones and the smartphone during a call | During a call, tap the touch sensor area on the L earphone 4 times quickly. |
| Using voice assistant function (Siri etc) | Touch the touch sensor area on the L earphone for about 1 second when not using the phone function, and release your finger once you hear a beep. |
Remote control operation (when using only the R earphone)
| Answering the call | Tap the touch sensor area on the R earphone once quickly. |
| Ending the call | Touch the touch sensor area of the R earphone for about 1 second during a call. Release your finger when you hear a beep sound. |
| Rejecting a call | Touch the touch sensor area of the R earphone for about 1 second when receiving a call. Release your finger when you hear a beep sound. |
| Switching between the earphones and the smartphone during a call | During a call, tap the touch sensor area on the R earphone 4 times quickly. |
| Using voice assistant function (Siri etc) | When not using the phone, touch the touch sensor area on the R earphone for about 1 second. Release your finger when you hear a beep sound. |
Note: The System cannot guarantee operation of all of the remote control functions.
Power Off
Powering off by placing earphones in the charging case.
After using the earphones, place them back into the charging case. The power of the earphones will turn off and charging will start automatically.
- The earphones start charging. Charging
Note
- If the battery power of the charging case has run out, the power of the earphones will not turn off automatically even when they are placed back into the charging case. When this occurs, charge the charging case. Charging the charging case
- The touch sensor may respond and the power may turn on when the touch sensor area comes in contact with something. When not in use, put the earphones back into the charging case.
Powering off using the earphones
Touch and hold the L and R touch sensor area for about 3 seconds.
- Release your finger after the indicator lights up. The indicator light goes off and the power turns off.
- When the power for the L or R earphone is turned off, the other side will automatically power off.
Note
The touch sensor may respond and the power may turn on when the touch sensor area comes in contact with something. When not in use, put the earphones back into the charging case.
Features
- Solid and sturdy cool design
- Dark tone color variation
- Max. 30 hours of continuous playback in total with built-in battery and charging case
- Easy operation with touch sensor, auto on/off & connect, and stable wireless connection
- High sound quality reproduction by neodymium magnet
- Waterproof rated IPX5
- Single ear use (either left and right ears)
- A microphone for teleworking and hands-free calling
- Operations such as activating the voice assistant function can be done on the earphone itself
- Quick Charge (15 minutes for 90 minutes playback)
- Cool and dynamic two-tone design: Your world, your music. Let your personal style set you apart.
- Get your groove on longer: Enjoy the freedom of 30 hours battery life with included charging case. A quick 15-minute charge provides 90 minutes of music and movies.
- It’s a snap to start listening:Just remove the earbuds from the charging case to automatically power on and connect – return to power off.Touch sensor provides simple and smart operation.
- Difference you can feel: Optimal sound quality with no compromises. The powerful neodymium magnets deliver clean and crisp music to your soul.
- Worry-free True Wireless: Rain or sweat? Not a problem thanks to the IPX5 waterproof rating. Both the left and right earbuds can be used individually – listen to outside sounds in one ear while enjoying the groove of the music in the other.
Troubleshooting
Main Unit
| Symptom | Action |
|---|---|
| Unable to pair | Place both earphones into the charging case, wait for the indicator light to turn off or on, followed by taking out both earphones again at the same time.When pairing, make sure the BLUETOOTH device is within 1 m of the System.Operate the BLUETOOTH device to connect.Turn on the BLUETOOTH device and enable pairing.Delete the pairing information on the BLUETOOTH device list and perform pairing again.Perform operations after setting the BLUETOOTH function of the connected device to OFF and then to ON again.Perform operations after turning off the connected device and on again.Refer to the steps to establish a connection. Connecting (Power On)Check whether the System is connected to another device. Turn off the BLUETOOTH settings of other devices and enable pairing with the desired device. |
| The earphones flash and connection cannot be established | Turn on the BLUETOOTH device, enable its Bluetooth function and select the System from the BLUETOOTH device list.Place both earphones into the charging case, wait for the indicator light to turn off or on, followed by taking out both earphones again at the same time to connect. After taking out the earphones, move the L and R earphones close to each other. |
| Sound is heard only from the left or right earphone | Place both earphones into the charging case, wait for the indicator light to turn off or on, followed by taking out both earphones again at the same time to connect. After taking out the earphones, move the L and R earphones close to each other.Either the L or R earphone will be the base unit connecting to the BLUETOOTH device and the other earphone. Insert the ear pieces more securely.Reset the setting to factory default and connect again. Restoring the settings to the initial stateCheck whether one of the earphones is connected to another BLUETOOTH device. Turn off the BLUETOOTH settings of other devices and enable pairing with the desired device. |
| After connecting to the System, the BLUETOOTH device connected does not function immediately | Depending on the BLUETOOTH device connected, even when the indicator lights up after connecting to the System, the BLUETOOTH device may not function immediately due to the time lag in the connection operation. Wait for a few seconds and try operating again. |
| No response from the touch sensor | Re-charge the system and switch power on.Touch it directly with the ball of your finger. Do not touch with a pen or your fingernail.The touch sensor does not work if the sensor or your finger is wet. Wipe your finger dry with a cloth.The touch sensor does not work with gloves. Remove your glove and operate again.The touch sensor does not work when there is hair on the sensor. Touch the touch sensor area directly.Touch the center of the touch sensor area. |
| The volume is low or the sound is unpleasant | Increase the volume on the System or the BLUETOOTH device connected.Insert the ear pieces more securely.Change the size of the ear pieces. Audio operation |
| Unable to skip back to the previous track | During playback tap the touch sensor area on the R earphone 3 times quickly. The previous track or beginning of the current track will be played. |
| Unable to skip to the next track | During playback tap the touch sensor area on the R earphone 2 times quickly. The next track will be played. |
| The earphones fall off the ears easily | Change the size of the ear pieces. Audio operation |
| The sound is distorted | Adjust the volume on the BLUETOOTH device connected so that there is no distortion, and then adjust the volume on the System.Charge the main unit. Charging |
| Ring tone is soft and cannot be heard | The ring tone may not be heard from the earphone if the silent mode of the BLUETOOTH device is turned on. Turn off the silent mode of the BLUETOOTH device or adjust the volume of the ring tone. |
| The sound is choppy and there is noise | Use the connected device in a position or orientation that allows for the most stable communication. The sound tends to be interrupted when the System is covered with the hands.Try reducing the number of apps running on the BLUETOOTH device connected.Charge the main unit. Charging |
| The System does not work correctly | Re-charge the system and switch power on. |
| Unable to turn on the power | Charge the charging case first. Charging the charging caseCharge the main unit. Charging |
| Unable to charge and turn off the power (earphones) | Remove both earphones from the charging case and place them back in again.Make sure that the earphones are fully inserted into the charging case.Use a cotton swab to remove any dirt from the contacts of the earphones and charging case.Charge the charging case first. Charging the charging case |
| Unable to charge (charging case) | Make sure that the USB cable is plugged in all the way.Please charge within the charging temperature range (5 °C (41 °F) to 35 °C (95 °F)). |
| The earphones are turned on during charging | When the charging case runs out of battery, the earphones are turned on. In this case, turn the earphones off manually. Powering off using the earphonesCharge the charging case. Charging the charging case |
| Unsure what the flashing and lighting up of the indicators indicate | Refer to Indicator status list. |
| Music or voice calls cannot be heard | Delete the pairing information on the BLUETOOTH device list. Perform pairing after turning off the connected device and on again (or after rebooting). |
- If no sound is heard from the earphones or the earphones cannot be connected to your BLUETOOTH device after performing the operations suggested in the Troubleshooting section, restoring the settings of earphones to the initial state may solve the problem. Restoring the settings to the initial state
Restoring the settings to the initial state
If no sound is heard from one side of the earphones or the earphones cannot be connected to your BLUETOOTH device, restoring the settings of earphones to the initial state may solve the problem.
Information of all the paired devices will be deleted (initialized). Perform pairing again from the start.
- Start by deleting the registration information of this unit from the BLUETOOTH setting on the BLUETOOTH device. Charge the charging case.
- Insert the L and R earphones into the charging case.
- The earphones are charged and the L and R indicators light up.
2. Press and hold the L touch sensor area for about 15 seconds until the L indicator flashes twice.
- After the indicator has flashed, the earphone is charged and the indicator lights up.
- If the indicator does not flash, repeat step 2 from the beginning.
3. Press and hold the R touch sensor area for about 15 seconds until the R indicator flashes twice.
- After the indicator has flashed, the earphone is charged and the indicator lights up.
- If the indicator does not flash, repeat step 3 from the beginning.
4. Remove the earphones from the charging case and set the L and R earphones side by side.
- The L and R indicators light up and the power turns on.
5. After a short while, the L and R indicators start to flash quickly and repeatedly.
- The settings are restored to the initial state (factory default).
- When the L and R indicators flash quickly, the earphones are now ready for device pairing. Pair the earphones with a device. Pairing (Registering a device)
Note
When the sound only emits from one side of the earphones even when the earphones are connected to the BLUETOOTH device, touch and hold the touch sensor area on both earphones again to turn off the power and repeat the steps from the beginning.
Indicator status list
| Earphone status | |||
| L | R | Status | Action |
| Lights up | Lights up | Charging in progress (while inserted in the charging case) | – |
| Light goes out | Light goes out | Charging completed (while inserted in the charging case) | – |
| Flashes slowly | Flashes slowly | L and R earphones pairing in progress | he L and R earphones will be automatically connected. The indicators will flash quickly while waiting for pairing. |
| Flashes quickly | Flashes quickly | Waiting for pairing | Turn on the BLUETOOTH function on the BLUETOOTH device, select this unit from the device list. If connection cannot be established, delete the pairing information on the BLUETOOTH device and perform pairing again. Pairing (Registering a device) |
| Flashes quickly | – | Pairing standby (when only L earphone is used) | Turn on the BLUETOOTH function on the BLUETOOTH device, select this unit from the device list. If connection cannot be established, delete the pairing information on the BLUETOOTH device and perform pairing again. Pairing (Registering a device) |
| – | Flashes quickly | Pairing standby (when only R earphone is used) | urn on the BLUETOOTH function on the BLUETOOTH device, select this unit from the device list. If connection cannot be established, delete the pairing information on the BLUETOOTH device and perform pairing again. Pairing (Registering a device) |
| Flashes every 5 seconds | Flashes every 5 seconds | L and R earphones are properly connected to the BLUETOOTH device | – |
List of Audio Guidance
| Audio Guidance | Status |
|---|---|
| Power On | When power is turned on |
| Power Off | When power is turned off |
| Pairing | When connection with a BLUETOOTH device begins |
| Pairing Successful | When connection with a BLUETOOTH device is completed |
| Connected | When a previously connected BLUETOOTH device is reconnected |
| Disconnected | When connection with a BLUETOOTH device is cut off |
| Charge Battery | When the remaining battery power becomes low |
License
- The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVCKENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.
- Siri is a trademark of Apple Inc., registered in the U.S. and other countries.
- Other company names and product names in this manual are trademarks of the respective companies and registered trademarks in other countries.
Source
- www.jvc.com
- Download User Manual – Download
- Product Page – Click Here
Read More