Logitech Zone 900 Wireless Headphone Setup Guide

Logitech Zone 900 Wireless Headphone Setup Guide : Here we will see the setup guide for Logitech zone 900 wireless headphone. Setup Guide is like user manual, instruction.

Join Us on Telegram : Click Here

Logitech Zone 900 Wireless Headphone Setup Guide

Know Your Product

WHAT’S IN THE BOX

1. Headset
2. USB-A Unifying + audio receiver
3. USB-C to A adapter
4. USB-A to C charging cable
5. Travel bag
6. User documentation 

POWER ON/OFF

1. Press power button for 1 second
2. Once powered on, light indicator turns white 

If no device is connected, it will flash white slowly

PAIRING VIA BLUETOOTH

1. Press power button for 2 seconds  Light indicator will flash white rapidly 
2. Open Bluetooth^® settings on your device
3. Select Logi Zone 900 in discoverable devices

Once successfully paired, light indicator will turn solid white

PAIRING HEADSET, KEYBOARD AND MICE VIA USB RECEIVER

Download Logitech Unifying Software at www logitech com/support/unifying

• USB-A USB-C 

Insert the Zone 900 receiver into the computer USB-A port  

Insert the USB-A receiver into the USB-C adapter Then insert the adapter into the computer USB-C port 

• Zone 900 headset is already paired to the receiver it ships with  Just power on the headset  Once successfully paired, the light indicator on the receiver will remain solid white  Light indicator on the headset will turn solid white
• To pair mice and keyboard, a  Open the software and continue clicking “Next” on the bottom right corner  If you already have other unifying receivers (with logo), please unplug them.

b Locate the OFF-ON slider on your mice and keyboard  Turn each device off and back on to restart your devices and finish pairing

• If paired, please follow the on-screen prompt and test it out to confirm successful pairing
  • If pairing failed, please retry or refer to troubleshooting on our support page  www logitech com/support/zone900

NOTE: you can pair up to 6 Logitech Unifying peripherals

ADJUSTING HEADSET

1. Adjust headset by sliding earcups up and down the headband
2. It may be easier to adjust the headset on your head  Move the earcups up and down the headband until they sit comfortably on your ears

ADJUSTING THE MICROPHONE BOOM

1. Microphone boom rotates 270 degrees  Wear it on either left or right side  Audio channel will switch automatically, depending on the direction you are wearing the microphone
2. Flexible microphone boom — adjust boom location to capture voice better

HEADSET CONTROLS

	Usage	Button	Action
Call controls	Answer / End call		Short press
Reject call	Multi-function	2 second press
Voice assistant	Multi-function	2 second press
Media controls	Play / Pause	Multi-function	Double press
Track forward	Multi-function  and “+”	Short press
Track backward	Multi-function  and “–”	Short press
Volume	Volume up	“+”	Short press
Volume down	“–”	Short press
Headset status	Check connectivity and battery life	“+” and “–”	Short press

Note:

• Media control functionality depends on type of application
• Call activities are always the first priority  When two devices are connected, the Bluetooth^® connection will be prioritized over receiver  When two Bluetooth^® devices are connected, the last active device will override the other

Tip: Button customizations and Music EQ controls available on Logi Tune

ACTIVE NOISE CANCELLATION (ANC)

ANC blocks out the noise around you to help you concentrate on the task at hand

1. Press the ANC button on the side of the earcup
2. There will be voice notifications when turning ANC on and off  These can be turned off in Logi Tune

HEADSET LIGHT INDICATOR

Light	Light	Status
White	Solid	Powered on or fully charged
Breathing	Battery charging	Battery charging
Fast pulsing	Bluetooth pairing mode	Bluetooth pairing mode
Slow pulsing	No paired device	No paired device
Red	Solid	Low battery
Fast pulsing	Bluetooth pairing mode while low battery	Bluetooth pairing mode while low battery
Slow pulsing	No paired device while low battery	No paired device while low battery

RECEIVER INDICATOR LIGHT

CHARGING

Headset automatically powers off when left idle. Sleep timer can be changed in the Logi Tune Headset indicator light will turn RED when battery is low.

Charging via USB cable

1. Plug the USB-C cable end into the USB-C port on the bottom of the earcup
2. Plug the USB-A end into the USB-A charging port on your computer or AC adapter
3. Indicator light will be a breathing white light for charging
4. Indicator light will be solid white when fully charged 
   • 2 hours will fully charge the battery  
   • 5 minutes will give you 1 hour of talk time
5. Headset can be used with receiver and Bluetooth paired while charging

Charging via Qi wireless charger

1. Fold headset with the wireless charging icon on the earcup to the outside
2. Place earcup with wireless charging icon on top of any Qi wireless charging base *
3. Indicator light will be a breathing, white light when charging
4. Indicator light will be solid white when fully charged 
   • 2 hours of charging fully charges the battery

* Qi wireless charging base is not included

LOGI TUNE APP

Install application

Download Logi Tune from www logitech com/tune

ADJUSTING SIDETONE

Sidetone lets you hear your own voice during conversations so you are aware of how loud you are talking  In Logi Tune, select the sidetone feature, and adjust the dial accordingly

• A higher number means you hear more external sound
• A lower number means you hear less external sound

AUTO SLEEP TIMER

By default, your headset will automatically power off when not in use for one hour  Adjust the sleep timer in Logi Tune 

UPDATE YOUR HEADSET

It is recommended to update both your headset

and receiver  To do so, download Logi Tune from www logitech com/tune

RESET YOUR HEADSET

To reset your headset back to its original state, power headset on, press and hold the ANC button and volume ’–’ button for 5 seconds  The headset is successfully reset when it powers off and indicator light turns off

DIMENSIONS

HEADSET:

Height x Width x Depth:  174 7 x 176 7 x 70 7 mm WEIGHT:

0 1808 Kg EARPADS:

Height x Width x Depth:  70 7 x 70 7 x 16 4 mm

RECEIVER: Height x Width x Depth:  35 5 x 16 2 x 5 3 mm

ADAPTER:

Height x Width x Depth: 

106 7 x 17 5 x 10 1 mm

SYSTEM REQUIREMENTS

Works with common calling applications across almost all platforms and operating systems

Works with Windows, Mac, or Chrome based computer via USB-C, USB-A, Bluetooth and iOS or Android Bluetooth enabled devices

TECHNICAL SPECIFICATIONS

Microphone Type: Omni-directional dual MEMS mic array

Frequency response (Headset): 30~13 kHz @ -10 dB (music mode),

100~8 kHz (talk mode)

Frequency response (Microphone): 85~20 kHz @-3 dB

Battery type: Built-in battery (Lithium ion)

Battery life (talk time): 14 hrs (ANC on), 15 hrs (ANC off)

Battery life (listening time): 14 hrs (ANC on), 16 hrs (ANC off)

Bluetooth^® version: 5 0

Wireless range: Up to 30 m/100 ft (open field line of sight)

Qi Wireless charging enabled

USB-A to C charging cable: 4 25 ft (130 cm)

www.logitech.com/support/zone900

Source

• https://www.logitech.com/
• Download setup guide – Download

Read More :

• Logitech H600 Wireless Headset User Manual