If you are searching for Marshall Acton 2 Bluetooth Speaker User Manual then you are at the right place. Let’s unbox the user manual of marshall acton 2 bluetooth speaker.
Marshall Acton 2 Bluetooth Speaker User Manual
LEGAL & TRADEMARK NOTICE
- Design of device and packaging are intellectual properties of Zound Industries International AB and Marshall Amplification Plc. © All Rights Reserved. Zound Industries International AB is hereinafter referred to as “Zound Industries” or “manufacturer”.
- MARSHALL, Marshall Amps, their respective logos, “Marshall” and “Marshall” trade dress are trademarks and intellectual property of Marshall Amplification Plc and may not be used without permission. Permission granted to Zound Industries.
- The Bluetooth® wordmark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Zound Industries is under license.
- Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries.
- Google Play and the Google Play logo are trademarks of Google LLC.
- All other trademarks are the property of their respective owners and may not be used without permission.
- For more legal information related to this product and to its use in your specific region, and for more detailed information about Zound Industries and partner & license information, please visit the website: www.marshallheadphones.com. The user is recommended to visit the website regularly for up-to-date information.
Zound Industries International AB, Centralplan 15, 111 20 Stockholm, Sweden.
BOX CONTENTS
- MARSHALL ACTON II WIRELESS HOME Bluetooth® SPEAKER
- QUICK START GUIDE
- IMPORTANT SAFETY INSTRUCTIONS
- MAINS LEAD
GENERAL DESCRIPTION
- AUX INPUT FOR 3.5 mm JACK
- SOURCE INDICATORS
- SOURCE BUTTON
- VOLUME KNOB
- BASS KNOB
- TREBLE KNOB
- PLAY/PAUSE BUTTON
- POWER LEVER
- BASS PORT
- BACKPLATE
- MAINS INPUT
- MAINS LEAD
PLUGGING IN THE ACTON II
IMPORTANT: ALWAYS ENSURE THAT THE MAINS LEAD, POWER JACK AND SPEAKER ARE COMPATIBLE WITH YOUR MAINS SUPPLY AND WALL SOCKET.
- CONNECT THE MAINS LEAD INTO THE MAINS INPUT ON THE SPEAKER.
- CONNECT THE POWER JACK TO THE WALL SOCKET.
TURNING THE ACTON II ON/OFF
- ON: PULL AND HOLD THE POWER LEVER TOWARDS THE FRONT OF THE SPEAKER UNTIL THE POWER ON SOUND PLAYS AND THE INDICATORS LIGHT UP.
- OFF: PULL AND HOLD THE POWER LEVER TOWARDS THE FRONT OF THE SPEAKER UNTIL THE POWER OFF SOUND PLAYS AND ALL INDICATORS TURN OFF.
SETTING UP THE ACTON II
CONFIGURE THE SPEAKER WITH THE MARSHALL BLUETOOTH® APP TO GET THE MOST OUT OF IT. THE APP IS AVAILABLE FROM THE APP STORE AND GOOGLE PLAY.
001. DOWNLOAD THE MARSHALL BLUETOOTH® APP AND FOLLOW THE IN-APP INSTRUCTIONS.
SELECTING AUDIO SOURCE
THERE ARE MANY WAYS TO CONNECT TO YOUR ACTON II, EITHER WIRELESSLY OR BY CABLE.
• Bluetooth WIRELESS Bluetooth CONNECTION
- AUX – 3.5 mm STEREO JACK
- PUSH THE SOURCE BUTTON TO TOGGLE BETWEEN Bluetooth AND AUX AUDIO SOURCE.
- A LIT INDICATOR SHOWS WHICH SOURCE IS SELECTED.
THE SOURCE CAN ALSO BE SELECTED FROM THE MARSHALL BLUETOOTH® APP.
CONNECTING VIA Bluetooth (PAIRING)
- SELECT Bluetooth AS THE INPUT. PUSHING THE SOURCE BUTTON TOGGLES THE INPUT SOURCES.
- PUSH AND HOLD THE SOURCE BUTTON FOR 2 SECONDS. THE Bluetooth INDICATOR STARTS TO BLINK.
- ENABLE Bluetooth ON YOUR DEVICE (SMARTPHONE, TABLET, COMPUTER).
- SELECT ACTON II FROM THE Bluetooth LIST AND ACCEPT PAIRING.
THE Bluetooth INDICATOR ON THE SPEAKER STOPS BLINKING AND REMAINS LIT WHEN THE UNITS ARE CONNECTED.
ACTON II CAN BE CONNECTED TO TWO Bluetooth DEVICES AT THE SAME TIME. PLAYING A CONNECTED Bluetooth DEVICE WILL MAKE IT THE SELECTED AUDIO SOURCE, PAUSING ANY PREVIOUSLY PLAYED AUDIO ON THE SECOND DEVICE.
CONNECTING VIA AUX INPUT
- CONNECT A 3.5 mm STEREO JACK TO THE INPUT LABELLED AUX ON THE TOP OF THE SPEAKER.
- CONNECT THE OTHER END OF THE LEAD TO THE AUDIO OUTPUT ON YOUR AUDIO SOURCE.
- SELECT AUX AS THE INPUT. PUSHING THE SOURCE BUTTON TOGGLES THE INPUT SOURCES.
ADJUSTING THE VOLUME/BASS/TREBLE
THE ACTON II INCLUDES THREE CONTROLS FOR ADJUSTING THE AUDIO.
- VOLUME KNOB
- BASS KNOB
- TREBLE KNOB
PLAY/PAUSE CONTROL
THE ACTON II HAS A PLAY/PAUSE BUTTON TO CONTROL THE MUSIC WHEN PLAYING VIA
Bluetooth.
- SINGLE-CLICK TO EITHER PLAY OR PAUSE.
- DOUBLE-CLICK TO SKIP FORWARD.
- TRIPLE-CLICK TO SKIP BACK.
COUPLE SPEAKERS
TWO ACTON II, STANMORE II OR WOBURN II SPEAKERS CAN BE COUPLED TO ACT AS ONE SOUND SYSTEM. THERE ARE TWO MODES TO CHOOSE FROM:
- AMBIENT MODE – TWO SPEAKERS PLAY THE SAME AUDIO SYNCHRONISED. EACH SPEAKER PLAYS BOTH THE LEFT AND RIGHT CHANNELS.
CHOOSE THIS MODE IF YOUR SPEAKERS ARE PLACED AT DIFFERENT HEIGHTS, DIRECTION OR AREAS OF THE ROOM.
- STEREO MODE – TWO SPEAKERS OF THE SAME SIZE ARE COUPLED AS A STEREO PAIR. WITH ONE SPEAKER THE LEFT CHANNEL AND THE OTHER THE RIGHT.
CHOOSE THIS MODE IF THE SPEAKERS ARE PLACED AT THE SAME HEIGHT, EQUAL DISTANCE AND FACING THE SAME DIRECTION.
- TO COUPLE TWO SPEAKERS, OPEN THE MARSHALL BLUETOOTH® APP AND CONNECT TO YOUR SPEAKERS.
- GO TO COUPLE SPEAKERS AND FOLLOW THE IN-APP INSTRUCTION.
STANDBY MODE
IF THE ACTON II IS LEFT UNUSED FOR 20 MINUTES THE SPEAKER GOES INTO STANDBY TO SAVE ENERGY. IN THIS MODE ALL INDICATORS ARE OFF.
001. INTERACT WITH ANY BUTTON OR KNOB ON THE TOP PANEL TO WAKE THE SPEAKER UP FROM STANDBY MODE.
TECHNICAL INFORMATION
ACOUSTIC SPECIFICATION
- STEREO LOUDSPEAKER WITH BASS REFLEX SYSTEM
- DIGITAL CLASS D AMPLIFIERS: 2 x 15 W + 1 x 30 W
- TWEETERS: 2 x ¾” dome tweeters
- WOOFER: 1 x 4″ woofer
- BASS AND TREBLE TONE CONTROLS
- FREQUENCY RESPONSE: 50–20,000 Hz ±6 dB
- MAXIMUM SOUND PRESSURE LEVEL: 98 dB SPL @ 1 m
CONNECTIVITY
- Bluetooth®: Bluetooth 5.0
- AUX: 3.5 mm stereo jack
TECHNICAL INFORMATION
- MAINS INPUT VOLTAGE: 100–240 VAC
- MAINS FREQUENCY: 50–60 Hz
- SIZE: 260 x 160 x 150 mm
- WEIGHT: 2.85 kg
TROUBLESHOOTING
PROBLEM | CAUSE | ACTION |
THE ACTON II DOES NOT TURN ON | The speaker is not connected to a mains electricity supply. | Connect the mains lead to the Acton II and a working wall socket. Pull and hold the power lever towards the front of the speaker until the indicators light up. |
THERE IS NO AUDIO OR AUDIO IS TOO LOW | The wrong audio source is selected. | Ensure that the device is connected to the Acton II. |
Volume is set too low on either the audio source or the speaker. | Slightly increase the volume on your audio source or the speaker. | |
CANNOT CONNECT OR PAIR WITH A Bluetooth DEVICE | Bluetooth is not enabled on your device (smartphone, tablet, computer). | Activate Bluetooth on your device. |
There are already two devices connected to the speaker. | Disconnect one of the connected Bluetooth devices before connecting to the speaker. | |
The speaker is not in pairing mode. | Push and hold the Bluetooth button for 3 seconds to make the speaker discoverable by the device. |
PROBLEM | CAUSE | ACTION |
THE AUDIO IS DISTORTED | Volume is set too high on the audio source. | Turn down the playback volume on the audio source. |
The audio stream or audio file is of poor quality. | Try another audio file or music player. | |
Volume is set too high on the Acton II. | Lower the volume on the speaker. | |
Too much bass/treble on the speaker. | Lower the bass/treble on the speaker. | |
ERRATIC PERFORMANCE | Interference from another electronic device. | Move the Acton II to another spot. |
Turn off or move the interfering electronic device. |
NOTES:
A BLUETOOTH DEVICE COULD CAUSE AUDIO-RELATED OR TECHNICAL FAULTS, DEPENDING ON USE, IN THE FOLLOWING CASES:
- WHEN SOME PART OF THE BODY IS IN CONTACT WITH THE RECEIVING/TRANSMITTING SYSTEM FOR THE BLUETOOTH DEVICE OR THE ACTON II.
- ELECTRICAL VARIATIONS DUE TO OBSTACLES IN THE FORM OF WALLS, CORNERS, ETC.
- EXPOSURE TO ELECTRICAL DISRUPTIONS FROM DEVICES WITHIN THE SAME FREQUENCY BAND, FOR EXAMPLE MEDICAL EQUIPMENT, MICROWAVE OVENS AND WIRELESS NETWORKS.
THIS WIRELESS DEVICE MAY CAUSE ELECTRICAL DISRUPTIONS DURING USE.
Source
- marshallheadphones.com
- Download User Manual – Download
- Download User manual in all language – Download
- Product Page – Click Here
User Manual in Other Language – Acton II Bluetooth
Languages | User Manual Link |
Acton II Bluetooth – العربية – Arabic | Download |
Acton II Bluetooth – български език – Bulgarian | Download |
Acton II Bluetooth – Hrvatski – Croatian | Download |
Acton II Bluetooth – Čeština – Czech | Download |
Acton II Bluetooth – Dansk – Danish | Download |
Acton II Bluetooth – Nederlands – Dutch | Download |
Acton II Bluetooth – Eesti – Estonian | Download |
Acton II Bluetooth – Wikang Filipino – Filipino | Download |
Acton II Bluetooth – Suomi – Finnish | Download |
Acton II Bluetooth – Français – French | Download |
Acton II Bluetooth – Deutsch – German | Download |
Acton II Bluetooth – Ελληνικά – Greek | Download |
Acton II Bluetooth – עברית – Hebrew | Download |
Acton II Bluetooth – Magyar – Hungarian | Download |
Acton II Bluetooth – Bahasa Indonesia – Indonesian | Download |
Acton II Bluetooth – Italiano – Italian | Download |
Acton II Bluetooth – 日本語 – Japanese | Download |
Acton II Bluetooth – 한국어 – Korean | Download |
Acton II Bluetooth – Latviešu – Latvian | Download |
Acton II Bluetooth – Lietuvių – Lithuanian | Download |
Acton II Bluetooth – Norsk – Norwegian | Download |
Acton II Bluetooth – Polski – Polish | Download |
Acton II Bluetooth – Português – Portuguese | Download |
Acton II Bluetooth – Română – Romanian | Download |
Acton II Bluetooth – Русский – Russian | Download |
Acton II Bluetooth – 简体中文 – Simplified Chinese | Download |
Acton II Bluetooth – Slovenčina – Slovak | Download |
Acton II Bluetooth – Slovenščina – Slovene | Download |
Acton II Bluetooth – Español – Spanish | Download |
Acton II Bluetooth – Svenska – Swedish | Download |
Acton II Bluetooth – ภาษาไทย – Thai | Download |
Acton II Bluetooth – 繁體中文 – Traditional Chinese | Download |
Acton II Bluetooth – Türkçe – Turkish | Download |
Acton II Bluetooth – Українська – Ukranian | Download |
Acton II Bluetooth – Tiếng Việt Nam – Vietnamese | Download |
Read More