Shokz OpenRun Pro Sport Headphones User Manual : In this user manual guide, we will explore Shokz OpenRun Pro Sport Headphones manual.
Shokz OpenRun Pro Sport Headphones User Manual
Headphone Controls
ON/OFF
- Turn on the headphones: Press and hold the Power/Volume + Button until the LED Indicator flashes blue.
- Turn off the headphones: Press and hold the Power/Volume + Button until the LED Indicator flashes red.
Pairing
- Start with OpenRun Pro turned off.
- Press and hold the Volume + Button until the LED Indicator flashes red and blue alternately.
- Open your device’s Bluetooth settings and select ” Open Run Pro by Shokz.” Audrey will say “connected.”
How to Wear
Pick up the headphones, bring them behind the back of the base of your neck,
position the earhooks on your ears, then enjoy your music.
*Wearing your headphones the wrong way could cause discomfort. The transducers should rest in front of your ears.
Volume
Operate volume controls while audio is playing.
How to change volume: While your audio is playing, adjust headphone volume by pushing either the Volume + or Volume ‒ buttons.
Multifunction Button
Play music | Click once |
Pause music | Click once |
Next song | Double-click while music is playing |
Previous song | Triple-click while music is playing |
Prompt device’s voice assistant | Press and hold for 2 seconds |
Answer call | Click once |
End call | Click once |
Reject a call | Press and hold for 2 seconds |
Change the language | Double click while in pairing status (red and blue lights flash alternately) |
Answer a second call and decline the current call | Press and hold for 2 seconds while a second incoming call is ringing |
Answer a second incoming call and put the current call on hold | Click once while a second incoming call is ringing |
Switch between two calls | Click once while two calls are active |
Hanging up on a multiparty call is the current call | Press and hold for 2 seconds while two calls are active |
Check Battery Status
Operate controls while audio is not playing.
How to check battery status: Click the Volume + or Volume – button while music is paused, Audrey will tell you the battery status
“Battery high/Battery medium/Battery low/Charge me”
EQ Modes
Standard Mode: Balanced frequency for listening to music.
Vocal Booster Mode: Enhanced intermediate frequencies
for audiobooks, podcasts, etc.
Switching EQ Modes
Operate controls while music is playing.
How to switch EQ mode: Press and hold both buttons (Power/Volume + Button and Volume – Button) while music is playing until you hear a beep.
Multipoint Pairing
Pair Two Devices: Switch between two devices seamlessly with multipoint pairing.
Operate controls with headphones powered off.
- Start with your headphones powered off.
- Press and hold Volume + until Audrey will say “pairing” and the LED indicator flashes red and blue alternately.
- Press and hold the multifunction button and Volume + button until Audrey say “multipoint enabled.”
- Open first device’s Bluetooth menu and select “OpenRun Pro by Shokz.”Audrey will say “connected”.
- Turn your headphones off.
- Re-enter pairing mode by pressing and holding Volume + until Audrey says “pairing”and the LED indicator flashes red and blue alternately.
- Open second device’s Bluetooth menu and select “OpenRun Pro by Shokz.”Audrey will say “connected.”
- Turn your headphones off.
- Turn your headphones on. Your headphones are now connected to both devices.
Turn Multipoint Pairing Off
Operate controls with headphones powered off.
- Start with your headphones powered off.
- Press and hold Volume + until Audrey will say “pairing” and the LED indicator flashes red and blue alternately.
- Press and hold the multifunction button and Volume – button until Audrey will say “multipoint disabled.”
Changing Languages
Follow the instruction when headphones powered off.
- Start with your headphones powered off.
- Press and hold Volume + until Audrey will say “pairing” and the LED indicator flashes red and blue alternately.
- Double-press the multifunction button. Languages have been switched when you hear the corresponding language.
Charging Tips
The headset will automatically shut down when charging.
When the headphones are at low battery, there will be a “charge me” prompt and the red light will flash intermittently. Use the corresponding magnetic charging cable for charging.
The LED indicator will turn red during the charging process and the headphones will automatically turn off. The LED indicator will turn from red to blue when charging is complete.
Moisture Detection Alert
How it Works:
These headphones can detect liquid such as water, sweat, or rain. If the headphones are plugged into the charger while wet, the LED indicator will flash red and blue. The headphones will then emit a beep. If this happens, remove the charging cable, dry them completely, then proceed with charging.
Storage and Maintenance
- Store the headphones in a cool, dry place. The working temperature should be 0~45°C(32~113°F).Working in a cold/hot temperature, highly humid area, or low air pressure environment may reduce the battery life.
- Keep the product away from heat sources, direct sunlight, combustible gas or other liquids.
- Keeping the charging port dry before connecting to the charger will reduce the risk of damage.
- These headphones are water-resistant, but are not waterproof. Please do not submerse the headphones in water.
- Clean the headphones with a soft dry cloth.
- Do not charge right after exercising, in case there’s sweat inside the charging port, which could lead to circuit burning while charging.
- After storage for a long period, please charge the headphones before using again.
Note: Design and specification are subject to change without notice. For the most up-to-date product information, please visit https://shokz.com
Warning: To avoid the risk of explosion, fire, or leakage from toxic chemicals, please do not disassemble the product or replace, deform, or mutilate the battery.
Warranty
Your headphones are covered by a warranty.
Visit our website at https://shokz.com/pages/warranty-landing for details of the limited warranty.
To register your product, download the Shokz App.
*Failure to register will not affect your limited warranty rights.
Source
- shokz.com
- Download User Manual – Download
- Product Page – Click Here
Read More