In this user manual guide, we will review the Shure Aonic 215 Gen 2 True Wireless Earphones User Manual. Let’s start unboxing it.
Shure Aonic 215 Gen 2 True Wireless Earphones User Manual
Specifications
Secure Fit Adapters
| Frequency | 2402 to 2480 MHz |
| Modulation Type | GFSK, π/4DQPSK, 8DPSK |
| RF Output Power | -1.18 dBm EIRP (Left), 1.99 dBm EIRP (Right ) |
| Antenna Type | Integral antenna |
| Antenna Gain | -4.32 dBi (Left), -2.73 dBi (Right ) |
| Supported Codecs | Qualcomm aptX, SBC, AAC |
| Working Range | 10 m |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Charging Temperature Range | 0°C to 45°C (32°F to 113°F) |
| Storage Temperature | -10°C to 35°C (14°F to 95°F) |
SE215 Earphone
| Transducer Type | Single Dynamic MicroDriver |
| Sensitivity | – at 1 kHz – 107 dB SPL/mW |
| Impedance | – at 1 kHz – 20 Ω |
| Noise Attenuation | up to 37 dB |
| Frequency Range | 21 Hz–17.5 kHz |
| Input Connector | MMCX connectors |
| MMCX connectors | 20.8 g (.7 oz.) |
SAFETY PRECAUTIONS
Before using this product, please read and save the enclosed warnings and safety instructions.
WARNING FOR ALL EARPHONES!
Use, clean, and maintain earphones according to manufacturer’s instructions.
The possible results of incorrect use are marked by one of the two symbols—”WARNING” and “CAUTION”—depending on the imminence of the danger and the severity of the damage.
WARNING
- If water or other foreign objects enter the inside of the device, fire or electric shock may result.
- Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.
- Do not use when a failure to hear your surroundings could be dangerous, such as while driving, or when biking, walking, or jogging where traffic is present and accidents could occur.
- Keep this product and its accessories out of reach of children. Handling or use by children may pose a risk of death or serious injury. Contains small parts and cords that may pose risk of choking or strangulation.
- Prior to inserting the earphone, always recheck the sleeve to make sure it is firmly attached to the nozzle to decrease the risk of sleeves detaching from the nozzle and becoming lodged in your ear. If a sleeve becomes lodged in your ear, seek professional medical assistance to remove the sleeve.
- Stop using the earphones and consult a medical professional if you experience irritation, excessive wax buildup, or other discomfort.
CAUTION
- Never disassemble or modify the device, as failures may result.
- Do not subject to extreme force and do not pull on the cable or failures may result.
- Keep the earphone dry and avoid exposure to extreme temperatures and humidity.
- If you are currently receiving ear treatment, consult your physician before using this device.
Note
- High sound pressure
- Hearing damage risk
- To prevent possible hearing damage, do not listen at high volume levels for long periods.
IMPORTANT SAFETY INSTRUCTIONS
- READ these instructions.
- KEEP these instructions.
- HEED all warnings.
- FOLLOW all instructions.
- DO NOT use this apparatus near water.
- CLEAN ONLY with dry cloth.
- DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- ONLY USE attachments/accessories specified by the manufacturer.
- USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- UNPLUG this apparatus during lightning storms or when unused for long periods of time.
Before using this product, please read the warnings and safety instructions: SAFETY PRECAUTIONS
ShurePlus PLAY Mobile Listening App
Unlock the full potential of your listening experience: more info here
Auto Power and Pair
- Remove from case. The adapters automatically enter pairing mode.
- Select SHURE AONIC TW2 from your device
Earphone Charging
Earphone Charging
RED when charging, GREEN when fully charged.
Case Charging
LED indicators
Adapter LEDs
| Bluetooth pairing | Alternating red and blue |
| Bluetooth connected | Blue for 2 seconds, then off |
| Bluetooth connection lost | Slow blinking blue |
| Low battery | Slow blinking red |
Button Functions
| Power on | Press and hold the button until you hear an audible notification. You must power on both earphones. |
| Power off | Press and hold the button until you hear an audible notification. You must power off both earphones. Tip: Placing the earphones back in the case automatically powers them off. |
| Pair Bluetooth | From a powered off state: Press and hold the button on either adapter for about 5 seconds. |
| Play/Pause | Press the button on either adapter once. |
| Environment mode On/Off | Press the button on either adapter 2 times quickly. |
| Activate voice assistant | Press the button on either adapter 3 times quickly. |
Phone Call Functions
| Answer | Press one time |
| End | Press one time |
| Decline | Press and hold 2 seconds |
| Environment Mode | Press two times quickly |
| Mute/Unmute Mic | Press three times quickly |
Important: Use the ShurePlus PLAY app to identify the active phone call mic.
Volume controls
You can use the buttons to control the volume:
| Volume up | Press once, then press and hold |
| Volume down | Press once, then press and hold |
Troubleshooting
If you only hear sound from one side, when listening to audio:
- Pause the audio for 5-10 seconds to activate Standby mode (timing depends on which app you are using).
- Press play. The audio should be heard in both earphones for the rest of the use session.
Another option:
- Enable Environment mode with a double press.
- Disable Environment mode with double press. This resets the audio, enabling both adapters.
To avoid this situation:
- When pairing:
- Begin pairing mode with either adapter.
- Select “Shure AONIC TW2” in the Bluetooth device list.
- Power on the other adapter.
- Already paired: power them both on at the same time.
Reset paired devices list
You may find it necessary to reset the True Wireless adapters.
- Place adapters in charging case.
- Ensure that the charging case LED is red. If not, remove the adapters from the case and power them on for several minutes before starting the process again.
- Press and hold both buttons, 7 seconds.
The adapters reset.
To keep them sounding their best…
- Clean regularly to remove debris and deposits.
- Contact Shure Service and Repair to replace damaged product. Simply detach and return the broken earpiece for easy replacement.
Visit http://www.shure.com/earphones for replacement parts and important instructions on cleaning and maintenance.
IPX4 rated sweat and water resistant
The earphones and adapters are designed to be sweat and water resistant but are not meant to be submerged under water.
- The IPX4 rating applies to the earphones only
- The IPX4 rating does not apply to the earphones while charging
- The IPX4 rating does not apply to charging case; it is not sweat and water resistant
Detachable Adapters
Earphones and adapters are interchangeable and replaceable. The connector fits tightly, and may require moderate pressure to pull apart. Take special care to prevent damage to the earphone or adapter. When reconnecting, listen for a click.
- Do not use pliers or other tools.
- Do not pull on the adapter or put any pressure on the earphone nozzle.
- Grasp the connector and earphone as close as possible to where they join.
- Pull straight apart. If you pull at an angle, the connector will not detach.
Accessories
Furnished Accessories
| MMCX TRUE WIRELESS REPL CHARGING CASE | RMCE-TW2-CASE |
| REPL USB-C to USB-A CABLE 1M | RPH-CABLE-USB |
Replacement Parts
| LEFT MMCX TRUE WIRELESS REPLACEMENT | RMCE-TW2-LEFT |
| RIGHT MMCX TRUE WIRELESS REPLACEMENT | RMCE-TW2-RIGHT |
SAFETY PRECAUTIONS
Before using this product, please read and save the enclosed warnings and safety instructions.
WARNING FOR ALL EARPHONES!
Use, clean, and maintain earphones according to manufacturer’s instructions.
The possible results of incorrect use are marked by one of the two symbols—”WARNING” and “CAUTION”—depending on the imminence of the danger and the severity of the damage.
WARNING
- If water or other foreign objects enter the inside of the device, fire or electric shock may result.
- Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.
- Do not use when a failure to hear your surroundings could be dangerous, such as while driving, or when biking, walking, or jogging where traffic is present and accidents could occur.
- Keep this product and its accessories out of reach of children. Handling or use by children may pose a risk of death or serious injury. Contains small parts and cords that may pose risk of choking or strangulation.
- Prior to inserting the earphone, always recheck the sleeve to make sure it is firmly attached to the nozzle to decrease the risk of sleeves detaching from the nozzle and becoming lodged in your ear. If a sleeve becomes lodged in your ear, seek professional medical assistance to remove the sleeve.
- Stop using the earphones and consult a medical professional if you experience irritation, excessive wax buildup, or other discomfort.
CAUTION
- Never disassemble or modify the device, as failures may result.
- Do not subject to extreme force and do not pull on the cable or failures may result.
- Keep the earphone dry and avoid exposure to extreme temperatures and humidity.
- If you are currently receiving ear treatment, consult your physician before using this device.
IMPORTANT SAFETY INSTRUCTIONS
- READ these instructions.
- KEEP these instructions.
- HEED all warnings.
- FOLLOW all instructions.
- DO NOT use this apparatus near water.
- CLEAN ONLY with dry cloth.
- DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- ONLY USE attachments/accessories specified by the manufacturer.
- USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- UNPLUG this apparatus during lightning storms or when unused for long periods of time.
For Products That Use Bluetooth
WARNING
- Follow instructions from manufacturer.
- Product battery may explode or release toxic materials. Risk of fire or burns. Do not open, crush, modify, disassemble, heat above 140°F (60°C), or incinerate.
- Attention should be drawn to the environmental aspects of battery disposal.
- Product shall not be exposed to excessive heat such as sunshine, fire, or the like.
- Do NOT make unauthorized alterations to this product.
CAUTION
- Follow applicable laws regarding mobile phone and headphone use while driving.
- This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
- Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like
- Batteries (battery pack or batteries installed) shall not be crushed or cut
- Batteries (battery pack or batteries installed) shall not be subjected to extremely low air pressure
- Risk of fire or explosion if the battery is replaced by an incorrect type
Information to the user
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the head.
Also In The Box
- 1 – RMCE-TW2 Wireless Adapter Set
- 1 – pair – 215 Detachable Sound Isolating earphones
- 1 – Charging case
- 1 – Micro-USB-C Charging Cable
- 1 – Soft Flex Sleeves (S, M, L)
- 1 – Foam Sleeves (S, M, L)
Features
- we-inspiring, true wireless audio with clear sound and deep bass. No cords. No wires. Just pure listening.
- Secure, over-ear fit. Built with the same design musicians use for in-ear monitoring on-stage. Your earphones stay in place for unmatched, long-wearing comfort, even during high-energy activities.
- Sound Isolating™ technology blocks up to 37 dB of noise to eliminate distractions. Enjoy the most immersive listening experience no matter where you are.
- Environment Mode. Hear the outside world with the touch of a button.
- Up to 8 hours battery life. Uninterrupted audio wherever you are – on the train, in the gym, or at home. Included carrying case provides three additional charges for a total of up to 32 hours battery life on-the-go.
- Detachable connection allows the AONIC 215 Earphones to attach to different cable accessories. Stay connected to any device, including airplane entertainment systems.
- Enjoy clear calls with exceptional audio through integrated microphones for video conferencing and phone calls.
- Premium headphone amplifier and support for multiple codecs including Qualcomm® aptX™, AAC and SBC
- Bluetooth® 5 wireless technology for enhanced stability and a range of up to 30 feet (10 metres). Pairs to phones, tablets and laptops for music and calls.
- ShurePlus™ PLAY app allows you to customise your EQ and Environment Mode levels. Free to download for iOS and Android.
- Includes a two-year warranty, AONIC 215 detachable Sound Isolating™ Earphones, True Wireless Secure Fit Adapter set, fit kit with a variety of sleeves for the perfect fit, a charging case, and USB-C charging cable.
Source
- www.shure.com
- Download User Manual – Download
- Product Page – Click Here
Read More
- Shure Aonic Free True Wireless Earphones User Manual
- Shure SRH440A Professional Studio Headphones User Manual
- Shure SRH750DJ Professional DJ Headphones User Manual
- Shure SRH240A Professional Headphones User Manual
- Shure Aonic 215 Sound Isolating Earphones User Manual
- Shure Aonic 3 Sound Isolating Earphones User Manual
- Shure Aonic 4 Sound Isolating Earphones User Manual