I know you are searching for V Moda M200 Professional Studio Headphones User Manual. So your searches end here now.
V Moda M200 Professional Studio Headphones User Manual
Specifications
| Type | Closed back cover ear |
| Driver Unit | 50mm |
| Frequency Response | 5 to 40,000 Hz (Hi Res Audio Certified) |
| Impedance | 30 Ω |
| Sensitivity | 101.5dB / (1kHz* 1mW) |
| Maximum Input Power | 1W |
| Weight | 290g |
This document explains the specifications of the product at the time that the document was issued. For the latest information, refer to www.v-mode.com.
Package Contents
- M200 Over Ear Headphones
- Exoskeleton Carry Case
- Balanced Audio Cable
- Speak Easy 1 Button Cable
- Half Inch Adapter
- Carabiner Clip
Using Your Headphones
- Very important: Place earcups on corresponding ear. “L” on left ear, “R” on right ear.
- Push hair back, extend the earcups from headband until they fit comfortably on ear, creating a sung fit to ensure highest sound quality and comfort.
- Wear headphones with the cord hanging in front of your shoulder to ensure headphones stay put during strenuous activity.
- Insert straight plug into either earcup.
Folding And Strong Your Headphones
- Hold the two earcups lightly together, cushion to cushion.
- Place the heel of other hand on top of headband.
- Push gently together to activate the Clip Fold hinge.
- Place the headphones in the Exoskeleton case, with the headband placed closed to the case’s hinge.
- Insert any cables you wish in the extra space below.
- Zip the Exoskeleton case to close.
Using Call/Music Control
1. During Music Playback
a. Click V button once to pause and again to resume playback.
b. Click V button twice quickly for next track.
c. Click V button three times quickly for previous track.
2. During calls
a. Click V button once to answer incoming call, click once to end call.
b. Press and hold V button down for about two seconds to decline an incoming call.
c. Click V button once to switch over to a waiting call, click again to switch back to original.
Troubleshooting
| Problem | Suggestions |
| No Audio | Make sure the audio device’s headphone jack is free of debris and that the headphone plug is securely connected. |
| Lack of or excessive bass or treble | Turn off any audio enhancement features on audio devices. Make sure cable is firmly connected to the headphone (use straight plug) and device (use 45 degree plug). if the problem persists, try another cable |
| Uneven sound | Make sure cable is firmly connected to the headphone by insuring male 3.5mm is inserted into female 3.5mm all the way |
| Distorted sound | Check the sure problem is not with the audio device of the file to which you are listening. Ensure the EQ setting on the device are set properly. Make certain you have a sung fit and that the driver is pointed directly towards the ear |
| Headband to tight | To relieve the pressure, you can stretch the headband by bending it outwards (placing the hands on either end of the headband – not the earcups). You may repeat this process until you’re happy with a looser fit. You can also bend the headband inwards to make tighter fit. |
| 1-Button Speak Easy Cable play/pause button not working | Make sure you have the 45 degree plug inserted into your device (phone, tablet, laptop, etc). and the straight end plug inserted into your headphones. You may also want to make sure your headphone socket on your device is clean an clear of debris. |
| No sound when plugged into DJ mixer/receiver when using supplied Half adapter with headphones | It is possible that your mixer/receiver/device is incompatible with our current half adapter and/or our cables. Please try using a standard audio cord (no microphone/splitter) or our Coil Pro cable instead. |
Source
- www.v-moda.com
- Download User Manual – Download