3M PELTOR TacticalPro Communications Headset MT15H7F SV User Manual

In this user manual guide, we will review the 3M PELTOR TacticalPro Communications Headset MT15H7F SV User Manual.

3M PELTOR TacticalPro Communications Headset MT15H7F SV User Manual

3M PELTOR TacticalPro Communications Headset MT15H7F SV User Manual
3M PELTOR TacticalPro Communications Headset MT15H7F SV User Manual

Specifications

Attenuation26 dB
Audio TypeCommunication
Auxiliary PortJ22
Battery LifeApprox. 1000 hours
Battery TypeDisposable AA, AA or Rechargeable NiMH Pack
BrandPELTOR
Communication DirectionListen-only
Communication TypeEnvironmental Listening
Communication via External 2-Way RadioNo
Connection TypeWireless
Hearing Protection StyleEarmuffs
Hearing Protection TypeFoldable Headband
In-Ear SolutionsNo
Intrinsically SafeNo
Level Dependent Function for Ambient ListeningYes
Product ColorBlack
Product TypeProtective Hearing
PurposeGeneral Industry
Specifications MetANSI S3.19-1974
Suspension MethodHeadband

Details

A premier hearing protection and communication solution for noisy environments

You know wearing hearing protection in noisy environments is important for worker safety, but sometimes the ability to hear alarms and vehicles and effectively communicate with other workers can be equally important.

The 3M PELTOR TacticalPro Headset is the premium protective hearing earmuff for clear, life-like sound reproduction and its design is ruggedized for use in demanding environments.

Perfect choice for a wide variety of applications

*U.S. EPA specifies the NRR as the measure of hearing protector noise reduction. However, 3M makes no warranties as to the suitability of the NRR for this purpose. 3M strongly recommends personal fit testing of hearing protectors. Research suggests that users may receive less noise reduction than indicated by the attenuation label value(s) on the packaging due to variation in fit, fitting skill, and motivation of the user. Refer to applicable regulations or guidance on how to adjust attenuation label values. It is recommended that the NRR be reduced by 50% to better estimate typical protection

Cleaning and Disinfecting 3M PELTOR Protection & Communication Solutions

Outer shells: The outer shells and headband can be wiped with a cloth wetted with soap and warm water. Do not immerse the headset in water to clean.

NOTE: Do NOT immerse the hearing protector in water to clean. If the hearing protector gets wet from cleaning, rain or sweat, turn the earmuffs outwards, remove the ear cushions and foam liners, and allow to dry before reassembly. This is important to preserve and protect the electronic components inside the cups.

The science of hearing

The 3M PELTOR Brand is known around the globe as a leader in innovative hearing protection and communication solutions. From manufacturing to transportation to elite tactical military teams and local law enforcement, industries rely on PELTOR innovations like environmental listening technology-that automatically adjusts the level of hearing protection based on noise levels, allowing team members to communicate without the temptation to remove their hearing protectors. They also depend on the technology that goes into our integrated two-way radio headsets, allowing for clear communication in noisy environments-including wireless capability powered by Bluetooth technology.

What are the Risks Associated with Impulse Noise?

One commonly accepted approach to assessing the health risks for people exposed to impulse noise is to measure the instantaneous peak sound pressure level (Lpk) rather than the average sound pressure level (Lavg). When peak sound levels exceed 135 dB, the risk of damage to the auditory system and other adverse health effects increases significantly. Common health effects
associated with impulse noise include hearing loss, tinnitus, hyperacusis (abnormal sensitivity to loud sounds) as well as non-auditory effects such as hypertension, fatigue and other conditions related to stress.

Are Hearing Protectors Effective Against Impulse Noise?

When properly selected and worn according to the user instructions, hearing protection devices (HPDs) help reduce exposure to both continuous noises as well as impulse noises. However, it is difficult to predict the required and/or actual hearing protection obtained during exposure to impulse noises. For gunfire, the weapon type, number of rounds fired, proper selection, fit and use of hearing protection, the proper care and condition of the hearing protectors, and other variables will impact hearing protector performance.

Traditional Passive Hearing Protectors

Passive hearing protectors are devices without electronic components. Traditional passive HPDs, such as roll-down foam earplugs, push-to-fit foam earplugs and earmuffs, create a physical barrier that reduces (attenuates) the sound level that reaches the wearers’ ears by a certain amount regardless of the sound level to which the wearer is exposed. For example, someone who selects and wears 3M E-A-Rsoft FX Earplugs correctly and obtains 33 dB of noise reduction overall would be expected to obtain that amount of noise reduction for an 85-dB SPL exposure and at least that much or more noise reduction for a 150-dB SPL exposure. These devices are sometimes referred to as “conventional” or “non-level-dependent” hearing protectors.

Passive Level-Dependent Hearing Protectors

HPDs that incorporate specialized acoustic filters are often referred to as “level-dependent” or
“nonlinear.” Unlike traditional passive hearing protectors, these devices create a relatively transparent barrier at low sound levels, using a tiny orifice or a thin diaphragm. The intention is for the amount of noise reduction to increase in proportion to the sound level to which the wearer is exposed.

At low sound levels, below 110 dB SPL for example, these devices provide little or no attenuation,
allowing the wearer to maintain better hearing ability*. However, when the wearer is exposed to very high level, short-duration impulse noises, the acoustic filters instantaneously restrict the transmission of sound into the ear by a greater amount that increases as sound level increases, to help boost the attenuation of the peak sound pressure wave, Lpk, and reduce the exposure of the wearer.

Some level-dependent HPDs, such as the 3M Combat Arms Earplugs, allow the wearer to switch
from the impulse noise protection mode to a continuous noise protection mode by sealing the acoustic filter, thus causing the device to function as a traditional hearing protector. This can be useful when the wearer is exposed to impulse noise at certain times and continuous noise at other times.

Electronic Level-Dependent Hearing Protectors

These HPDs use electronic technology to maintain, and in some cases enhance, hearing ability when sound levels are low. They are often referred to as “active” hearing protectors. Environmental microphones (also referred to as tactical, surround, or situational-awareness microphones) on the device pick up the low-level (non-hazardous) sounds in the area around the wearer and reproduce them inside the hearing protector. Typically the wearer can control the loudness using a volume control on the device. The amount of sound that is electronically reproduced inside the HPD decreases proportionally as the sound level outside the device increases. Electronic compression is used to limit the level of the reproduced sound inside the headset to non-hazardous levels.

Since the maximum attenuation provided (in the absence of electronic reproduction) is based on the physical properties of the earmuff cups or earplugs that create the acoustic seal around the ear or in the ear, these devices provide protection against both impulse and continuous noises in the same way as traditional HPDs. The big difference is the ability of electronic level-dependent HPDs to allow the wearer to hear more effectively during periods of low noise without the need to remove the device.

All 3M PELTOR electronic level-dependent hearing protectors limit the sound reproduced from the environmental microphones to 82 dB SPL. In the absence of the reproduced signal (even if the active circuitry is powered off), some sound will continue to be transmitted into the ear since the barrier created by the earmuff cups or earplugs themselves has the same limitations as does a traditional HPD. In other words, even electronic level-dependent hearing protectors eventually depend on the nonelectronic components to help protect the wearer’s hearing.

  • *Hearing ability is a general term to describe various factors related to auditory situational awareness such as sound detection, recognition, identification, localization and communication.

Hearing Protector Guidance

A variety of factors affect the hazardousness of the impulse noises and the degree of hearing protection required, especially the number of exposures and overall peak level, Lpk, of each impulse. For example, the sound made by a weapon fired in an indoor firing range may have a greater intensity due to reverberation than the same weapon fired at an outdoor range where there is rapid sound decay. The caliber and type of weapon (handgun versus rifle) can also have a significant effect on L.

The following guidance is to be considered general in nature since the actual hazard associated with exposure to gunfire and other impulse noises and the protection obtained when hearing protectors are worn is influenced by the variables described above.

Regardless of the hearing protector being worn, the user should be alert to his or her own hearing. If during or after an exposure, tinnitus (ringing or buzzing in the ears) is heard or the user’s hearing seems muffled or dulled, or for any other reason the user suspects a hearing problem, the fit, condition or adequacy of the protector should be carefully checked and/or a more protective device or combination of devices (such as earmuffs and earplugs together) should be worn. For those exposed to weapons fire on a regular basis, periodic hearing evaluations are advised.

For highest noise reduction: wear dual protection (earmuffs worn over high attenuation earplugs fit deeply in the ear). This configuration will significantly boost the noise reduction but will reduce the user’s hearing ability.

For high noise reduction: wear a good quality single hearing protector, such as foam earplugs fit deeply in the ear or high attenuation earmuffs. This approach may also reduce hearing ability.

For better hearing ability: consider level-dependent hearing protectors, either passive or active.
Possible configurations include the following, with the dual-protection option being the more
protective.

  • Single hearing protection
    • Electronic level-dependent earplugs such as the 3M PELTOR Tactical 100, or
    • Electronic level-dependent earmuffs such as 3M PELTOR Tactical Sport, or
    • Passive level-dependent earplugs such as the 3M Combat Arms Earplugs
  • Dual hearing protection
    • Passive level-dependent earplugs worn together with electronic level-dependent earmuffs, or
    • Electronic level-dependent earplugs worn together with traditional passive earmuffs, or
    • Traditional passive earplugs worn together with electronic level-dependent earmuffs, or
    • Electronic level-dependent earplugs worn together with electronic level-dependent earmuffs.

Hunters may choose level-dependent HPDs to balance the need for protection with the ability to detect and locate nearby game animals. Likewise, target shooters may opt to combine electronic level-dependent devices with passive HPDs (dual protection) to allow better audibility of range commands without sacrificing hearing protection.

The importance of proper fit

The noise reduction of earmuff-style hearing protectors may be lower when eyeglasses, goggles or respirator straps are worn between the sealing surface of the earmuff cushions and the sides of the wearer’s head. For best noise reduction, select eyeglasses or goggles that have thin, flat temples or straps that will minimize interference with the seal of the earmuff cushions. Pull long hair back to the extent possible and remove other items that may degrade the earmuff seal such as pencils, hats, jewelry or earbuds. Do not bend and reshape the headband as this will cause a loose fit and allow sound leakage.

Earplugs should be used in accordance with the manufacturer’s instructions with special emphasis on selection of proper size and proper depth of insertion. If using disposable foam earplugs such as the 3M E-A-R Classic Earplugs, it’s important to ensure that the proper technique for rolling and compressing the plug is used to avoid creating a crease along the length of the earplug that can degrade the noise reduction properties of the plug.

3M recommends fit testing of hearing protectors to provide a better estimate of the noise reduction obtained by the wearer. Proper care and maintenance of hearing protectors is critical in ensuring the device’s protective capabilities can be maximized. To learn more about fitting, care and use of hearing protectors visit 3M online at www.3M.com/Hearing.

Source

Read More

Leave a Comment