boAt Airdopes 441 Wireless Earbuds User Manual

boAt Airdopes 441 Wireless Earbuds User Manual : In this guide, we have airdopes 441 bluetooth earbuds. Now we will review the user manual of boAt Airdopes 441 Wireless Earbuds.

Join Us on Telegram : Click Here

BOAT Airdopes 441 Wireless Earbuds User Manual

BOAT Airdopes 441 Wireless Earbuds User Manual
BOAT Airdopes 441 Wireless Earbuds User Manual

Specifications

Bluetooth VersionV5.0
Water ResistanceIPX6
Music PlaytimeUp to 4 Hours
Standby Time70 Hours
Transmission Range10m
Driver Size6mm
Bluetooth ProfileHFP/ HSP/ A2DP/ AVRCP
Frequency20Hz-20kHz
Battery Earbuds35mAh x2
Battery Charging Case500mAh
Charging Time1.5 Hours
Product Weight48.5g

In the box

  • 1x pair of Ear-Buds
  • 1x Charging Case
  • 2x Pairs of Ear Caps
  • 1x Charging Cable
  • User Manual

Product Overview

Earphone

  1. Ear-flag
  2. Charging Contacts
  3. Ear-cap
  4. Touch sensing area (function key, lights when the touch is active)
  5. Indicator light
  6. Microphone
BOAT Airdopes 441 Wireless Earbuds Product Overview Earphone
BOAT Airdopes 441 Wireless Earbuds Product Overview Earphone

Charging Box

  1. Charging box lid
  2. Charging thimble
  3. Battery indicator
  4. Type-C charging port
BOAT Airdopes 441 Wireless Earbuds Product Overview Charging Box
BOAT Airdopes 441 Wireless Earbuds Product Overview Charging Box

Power On (First Time User)

Step 1: To automatically switch the earbuds on (Smart Power On) simply take them out from the charging case. OR

To manually switch the earbuds on (Manual Power On), long touch the Capacitive Touch Control (*CTC) for 3 seconds on both Left and Right earbuds until the LED light begins to flash in blue.

Step 2: Both the earbuds will automatically pair with each other. The earbuds will enter into the Connection Mode, indicated by alternate green and blue LED flashes.

Connection Mode

Step 3: Turn on the Bluetooth functionality on your phone/media device and scan.

Step 4: Search for ‘boAt Airdopes 441’ and pair accordingly. Enter ‘0000’ as the passkey if asked.

Congratulations! Your earbuds are now connected successfully via Bluetooth.

BOAT Airdopes 441 Wireless Earbuds Power On (First Time User)
BOAT Airdopes 441 Wireless Earbuds Power On (First Time User)

Power On (Subsequent Usage)

The next time you when you open the lid of the case, our IWP (Insta Wake N’ Pair) Technology enables the earbuds to power on automatically and get connected to the previously paired device.

BOAT Airdopes 441 Wireless Earbuds Power On (Subsequent Usage)
BOAT Airdopes 441 Wireless Earbuds Power On (Subsequent Usage)

Note

  • Pairing mode lasts for 5 minutes. If the pairing time is missed then you will need to reconnect the ear-buds and follow the above mentioned procedure.
  • Airdopes 441 remembers previously connected devices; once switched on, the ear-buds automatically reconnect to the previously connected devices.

Single Earbud Usage

Step 1: Please note that both the earbuds can be used in mono mode. Use either of the two options; Smart Power On or Manual Power On for switching on the desired earbud.

Step 2: The selected earbud will automatically enter the connection mode indicated by alternating green and blue LED flashes.

Step 3: Turn on Bluetooth on your phone/media device and search for ‘boAt Airdopes 441’ to connect.

BOAT Airdopes 441 Wireless Earbuds Single Earbud Usage
BOAT Airdopes 441 Wireless Earbuds Single Earbud Usage

Note:

  • To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage.
  • You cannot skip tracks or return to the previous tracks in Mono mode.

LED Indicators / Functionalities

BOAT Airdopes 441 Wireless Earbuds LED Indicators Functionalities
BOAT Airdopes 441 Wireless Earbuds LED Indicators Functionalities

Charging The Earbuds

Step 1: Please insert the earbuds back inside the charging case in correct orientation.

Step 2: A green LED will indicate that the earbuds are being charged. Once fully charged the LED turns into blue.

Step 3: Once the earbuds are fully charged, the charging case automatically switches off to save power.

Note:

  • Before using the ear-buds for the first time, it is recommended to fully charge the ear-buds. Also, please keep the lid of the charging case closed while charging and use a 5V/2A adaptor.
  • When the earbuds are in low power, flashing green LED indicates the same.

Charge The Case

Step 1: To charge the case, plug one end of the Type-C cable into the case and connect the other end to a computer or a wall adapter.

Step 2: The indicator in the case blinks with blue light for representing 75%-100% power; it blinks with purple light for 35%-75% power while it blinks with red light for representing 0%-35% power. When the case gets fully charged, the blue light stays solid.

BOAT Airdopes 441 Wireless Earbuds Charge The Case
BOAT Airdopes 441 Wireless Earbuds Charge The Case

Note: The LED lights located on the charging case indicate the battery status of the case.

Basic Functions

  • Voice Assistant: Long touch the capacitive touch control on either earbud for 2 seconds to activate voice assistant.
  • Answer/Hang Up Call: Single tap the capacitive touch control on either earbud to answer an incoming call and once again to hang up an ongoing call..
  • Reject Call: Long touch the capacitive touch control on either earbud for 2 seconds in order to reject an incoming call.
  • Play/Pause Music: Single tap the capacitive touch control on either earbud to play a song or to pause one.
  • Next Track: When playing music, double tap the right earbud’s capacitive touch control in order to skip to the next song on the playlist.
  • Previous Track: When playing music, double tap the left earbud’s capacitive touch control in order to return to the previous song the playlist.

Note: Volume cannot be controlled via earbuds and can only be adjusted via phone/media device.

Voice Assistant

Step 1: Long touch the capacitive touch control on either earbud for 2 seconds to activate voice assistant.

Step 2: The respective voice assistant screen pops up and you may place your commands at ease.

Tips: You may try the following commands,

  • What is the weather?
  • Play a song.
  • Where are The Pyramids located?
BOAT Airdopes 441 Wireless Earbuds Voice Assistant
BOAT Airdopes 441 Wireless Earbuds Voice Assistant

Smart Power Off

Step 1: After usage, remove both the earbuds from your ears.

Step 2: Place the earbuds back into the charging case in correct orientation.

Step 3: The earbuds will automatically switch off (and enter intocharging mode).

Manual Power Off

Step 1: Long touch the CTC on either earbud for 5 seconds until the green indicator LED blinks before earbuds getting turned off, in order to manually switch off the earbuds. Please note that this powers off both the earbuds.

Step 2: Please keep the earbuds back into the charging case to charge the earbuds.

BOAT Airdopes 441 Wireless Earbuds Manual Power Off
BOAT Airdopes 441 Wireless Earbuds Manual Power Off

Factory Reset

Perform the Factory Reset in case you face any difficulty while operating your Airdopes 441

Step 1: Place both the earbuds back into the charging case in correct orientation to switch them off.

Step 2: Triple tap the capacitive touch control on both earbuds to perform the Factory Reset. Once done, it gets indicated by alternate red and blue LED flashes.

Step 3: Shut the lid of the charging case and then re-open it again.

Step 4: Once you take the earbuds out from the charging case, they automatically restart.

BOAT Airdopes 441 Wireless Earbuds Factory Reset
BOAT Airdopes 441 Wireless Earbuds Factory Reset

Congratulations! Your Airdopes 441 has been Reset.

Common Problems with Solutions

BOAT Airdopes 441 Wireless Earbuds Common Problems with Solutions
BOAT Airdopes 441 Wireless Earbuds Common Problems with Solutions

Troubleshooting

Potential ProblemSolution
If one earbud is not workingPerform the Factory Reset
If earbuds are not in connection/ scan modePerform the Factory Reset
If earbuds disconnect during phone callCharge the earbuds or perform the Factory Reset
If there are other exceptions in usagePlace the earbuds back into the charging case and try using them gain or perform the Factory Reset

Charging norms & Precautionary Guidelines

Charger/Brick/Adapter5V/2A
Cable/WireStandard Cable (35 Strands @0.10mm diameter/strand)
Any other accessory can be paired up with the product as long as the
specifications are as per above norms.

Advisable: The earbuds start at a 100% volume and it may need to be reduced when the earbuds are switch on at first. This can be done by using the volume control on the phone/ media device.

Source

Read More

Leave a Comment