Boult Audio AirBass MuseBuds User Manual

by

If you are finding Boult Audio AirBass MuseBuds User Manual then this is the right place for you. Let’s check this.

Boult Audio AirBass MuseBuds User Manual

Boult Audio AirBass MuseBuds User Manual
Boult Audio AirBass MuseBuds User Manual

For better sound quality experience, suggest use IOS 8.0/ Android 4.3 or above operating system.

Product Introduction

Boult Audio AirBass MuseBuds Product Introduction
Boult Audio AirBass MuseBuds Product Introduction

Charging the case

  • Use only 5V/1A USB Charger to charge this product.
  • The led light flashes green while charging, The green light keep constant on after fully charge.

Activating Earbuds and Charging Earbuds

  • Put both earbuds into the charging case to activate and charge them. (pins need to be well-contacted). The LED light will turn on red while charging and it turns off when the earbuds are fully charged.

TWS Pairing and Connection with Cell Phone

Take both earbuds out of the case at the same time and they will auto power on after 2-3 seconds. Both earbuds will auto pairing, at this moment the light on one earbud flashes blue and the light on the other earbud flashes red & blue alternately. Search for “Boult Audio Musebuds” in cellphone and tap to connect both earbuds with cellphone. Please insert both earbuds into charging case and repeat above steps if earbuds fail to connect.

Wearing Earbuds

Boult Audio AirBass MuseBuds Wearing Earbuds
Boult Audio AirBass MuseBuds Wearing Earbuds

Functions

Power-on

Method 1: Take out both earbuds and they will auto power on. (LED light turn on Blue)

Method 2: Press MFB for 2s to power on (LED light turn on blue)

Power-off

Press and hold MFB for 4s to power off (LED turns on red for 2s)

Reject Call

Press MFB for 1s to reject incoming call.

Answer Call/Hang of

Press MFB to answer incoming call and press again to hang off it

Playback/ Pause

When playing music, press MFB to pause it and press again to play it.

Voice Assistant

When standby, press and hold MFB for 1s untill the “beep” sound happen to activate voice assistant( Like: Siri).

Next Song/Previous Song

When playing music, double press MFB on any earbud to skip track backword (previous song), double press MFB on any earbud to skip forward (next song)

Increase/Decrease volume

When playing music, press MFB on any earbud for 3 times to get volume down or up.

(If Earbuds fails to connect with cellphone, no sound in left earbud or right earbud)

  • Take both earbuds out of the case. Press and hold the MFBs for 5 seconds(as the below picture shows) in power off mode. Don’t release your fingers until the LED light flashes red & blue alternately. When the LED light of both earbuds flashes red & blue alternately, Tap 4 times the MFB of right (R) earbud. Both earbuds will auto pairing after 3-5 seconds, at this moment the light on one earbud flashes blue and the light on the other earbud flashes red & blue alternately.
  • Delete the pairing name from the pairing list in cellphone, search for “Boult Audio Musebuds” in cellphone and tap to connect both earbuds with cellphone.
  • Please put both earbuds into charging case and repeat above steps if earbuds fail to connect.
Boult Audio AirBass MuseBuds Functions
Boult Audio AirBass MuseBuds Functions

When the LED light of both earbuds flashes red & blue alternately, Tap 4 times the MFB of right ® earbud.

Attentions

  • If the earbuds is left unused for over two weeks, please recharge it periodically.
  • Be sure to use a 5V DC,1A charger made by qualified manufacturer.
  • Ensure that the distance between your device and the earbuds not too far away, Ensure that nothing is blocking the signal between your device and the earbuds.
  • The implementation of the earbuds function will be different due to different protocols supported by different wireless device.
  • Don’t disassemble or modify your earbuds for any reason to avoid any damages and danger. Don’t over charging to avoid the outbreak of a fire. Avoid exposing the earbuds to extreme temperatures (below 0℃ or above 45℃). Extreme temperatures can cause deformation of earbuds components and reduce battery life and the life span of your earbuds. Don’t put the device’s LED lights close to humans’ or animals’ eyes. Do not use the earbuds during a thunderstorm. Thunderstorms can cause serious malfunction and increase the risk of electric shock.
  • Do not clean the earbuds with harsh chemicals or strong detergents.
  • Please follow our company’s operating instructions. If any damage or danger caused due to the improper use, the responsibility shall be undertaken by the operator.

Source

Read More

Leave a Comment