We have Jaybird Tarah Wireless Headphones User Manual. So we will review the Jaybird Tarah Headphones manual.
Jaybird Tarah Wireless Headphones User Manual
|Bluetooth Version||5.0, Multipoint|
|Profile||Handsfree, Headset, A2DP, AVCRP, SPP|
|Effective Range||10 meters (30 feet)|
|Play Time||6 Hours|
|Power||Bluetooth headset: 5.0V , 1A|
|Charging Time||2 Hours|
|Quick Charge||10 Min = 1 Hours play time|
|Dimensions||13.25 x 23.6 mm earbud size, 490 mm cord length|
|Weight||Approx 13.85 g (without eargels)|
*Play time and standby time may vary due to usage conditions. Adding additional bass to your sound profile through the Jaybird app will reduce play time.
IN THE BOX
We recommend you charge your earbuds using any 5V 500mA USB power source. Wall/car adapters/chargers that supply more than 5.5 V may damage your Jaybird earbuds and should not be used.
A. Take the included USB charging cradle and plug it into a USB power source.
B. The white LED will start pulsing when charging, and will turn solid white when fully charged.
A. On your audio device, turn Bluetooth on and ensure it is actively searching for Bluetooth devices.
B. With your Tarah earbuds turned off, press and hold the Middle Button until you see the LED blinking white. You will hear the “READY TO PAIR. DOWNLOAD THE JAYBIRD APP FOR AN ASSISTED SETUP” voice prompt.
C. Select “Jaybird Tarah” in the of discovered devices.
D. Once your Tarah earbuds have connected to your audio device you will hear the “Connected” voice prompt. You are now ready to listen to your music.
If the pairing is not successful, switch off your earbuds by pressing the Middle Button until the red LED illuminates and you hear a descending “Power off” tone. Once your earbuds have powered off repeat steps A-D.
NOTE: When you turn your Tarah earbuds on for the first time or after a reset, they will be in pairing mode.
FINDING YOUR PERFECT FIT
FINDING THE CORRECT EARGEL SIZE
A. Try with pre-installed eargels. Place these firmly within your ears as shown in the illustration.
B. If your earbuds are not comfortable, or feel loose, or too tight, try alternative sized eargels. Be patient, it may take some time to get the perfect fit.
C. Once you are happy with the fit, you are good to go.
Note: It is quite common to use different sized eargels in each ear.
SPEED CINCH & SHIRT CLIP
The speed cinch helps to keep the cord off your neck and shoulders, which is ideal for sports use.
A. Place your Tarah earbuds in your ears.
B. Grab the cord beneath the cinch with one hand. With your other hand adjust the cinch up or down until you find the right cord length allowing a snug fit with no excess slack.
Use the included shirt clip to secure your Tarah earbuds to the back of your shirt.
A. Prior to using the shirt clip remove, the cinch.
B. Attach the shirt clip to your shirt as it shown in the illustration below.
- Play or pause, a song or video with a single press and release of the Middle Button.
- To skip a song, long press the Vol. + Button.
- To go backwards, long press the Vol. – Button.
- To change the volume + or –, press the Vol. + or Vol. – Button.
- To activate voice assistant, (Siri or Google Now), double press the Middle Button.
- Accept/End a phone call, press the Middle Button.
- To decline a phone call, double press the Middle Button.
- To change the volume + or –, single press the Vol. + or Vol. – Button.
MULTIPOINT – CONNECTION TO MULTIPLE DEVICES
Multipoint allows you to be connected to two devices simultaneously. You can for instance be connected to your laptop and your mobile phone. While listening to music on your laptop you will be able to accept an incoming call on your phone.
- Ensure your earbuds are up to date. Connect to the Jaybird app to see if a firmware update is available.
- Ensure your Tarah earbuds are paired and connected to both devices. Follow pairing instructions on.
- Make sure that only the two devices you want to connect to are turned on and in proximity.
Your Tarah can remember up to eight paired Bluetooth devices and can be actively connected two devices at a time.
With the right smartwatch you can leave your phone at home. Just sync music to your smartwatch and pair Tarah to your smartwatch. Use your smartwatch user manual for instructions on how to pair a Bluetooth device.
- Apple WatchOS
- Android Wear
Soft reset: If your earbuds are not responding, put your Tarah in the charger cradle and connect the USB charging cradle to a power source. This will turn your earbuds off and perform a soft reset.
Factory reset: If this does not resolve your problem we recommend resetting your earbuds to their original factory settings. Before starting this process please “FORGET” or “REMOVE” your Tarah device in your Bluetooth list of discovered devices in your audio device.
- Download User Manual – Download