Mark Levinson No5909 Headphones Owners Manual

In this post, we will review the Mark Levinson No5909 Headphones Owner’s Manual. Let’s start reviewing this.

Mark Levinson No5909 Headphones Owner’s Manual

Mark Levinson No5909 Headphones Owners Manual
Mark Levinson No5909 Headphones Owners Manual

OVERVIEW

Congratulations on your selection of the Mark Levinson® N0 5909 Premium Wireless ANC Headphone. For over 50 years, discerning individuals have chosen Mark Levinson products for their luxurious quality and revealing sound. Robust materials, lavish finishes, bold geometry, and outstanding performance are celebrated attributes of the Mark Levinson brand. The N05909 headphone is made with the finest materials, technology, and craftsmanship in the world and will deliver outstanding performance for many years to come. For optimum performance, please read this guide and follow the unpacking and setup instructions carefully.

WHAT’S IN THE BOX

  • Mark Levinson N0 5909 Premium Wireless ANC Headphones
  • Travel Storage Case
  • 1.25m USB-C to USB-C Charging Cable
  • 1.25m USB-C to 3.5mm Proprietary Audio Cable
  • 4m USB-C to 3.5mm Proprietary Audio Cable
  • 3.5mm to 6.3mm Adaptor
  • USB-C to USB-A Adaptor
  • Airplane Adaptor
  • Microfiber Polishing Cloth
  • Quick Start Guide

PRODUCT OVERVIEW

Mark Levinson No5909 Headphones Overview
Mark Levinson No5909 Headphones Overview
  1. Premium Leather Headband with Memory Foam Interior
  2. Replaceable and Memory Foam Ear Pads
  3. Forged and Machined Aluminum Components throughout
  4. USB-C Connector for Passive Audio Listenting & Charging
  5. Adjustment Arm
  6. 8 Microphones (4 talk microphones and 4 ANC microphones)

ADJUSTABILITY, FIT & COMFORT

Mark Levinson No5909 Headphones Adjustability fit and comfort
Mark Levinson No5909 Headphones Adjustability fit and comfort

Functions

Mark Levinson No5909 Headphones Functions
Mark Levinson No5909 Headphones Functions

Button Functions

Mark Levinson No5909 Headphones Button Function
Mark Levinson No5909 Headphones Button Function

Play/Pause / Answer/End Call

  • x1 Play / Pause / Answer Call / End Call
  • x2 Skip Forward
  • x3 Skip Back
  • HOLD: Voice Assistant Battery Level Indicator

High Battery

  • Med Battery Low Battery
  • USB-C Charging Port Fully Charged Charging

USB-C Charging Port

  • Fully Charged
  • Charging

POWERING ON / OFF

To Power On, Press and hold (>1 second) the ON/OFF button to power ON. The Left earcup LED will show solid white light while unit is on – Battery level will be displayed for a few seconds at startup on Right earcup – Green high charge – Orange medium charge – Red low charge.

To conserve battery power, the headphones will power OFF after 30 minutes of inactivity (default) – Default can be changed via the App – 30min, 1HR, 3HRS, NEVER

To conserve battery power, the headphones will power OFF after 30 minutes of inactivity (default) – Default can be changed via the App – 30min, 1HR, 3HRS, NEVER To manually Power Off, Press and hold (>1 second) the ON/OFF button, White light will go off and the charging LED will flash Red twice.

CHARGING

To charge, plug in the USB-C Connector and connect to a powered USB-A port

NOTE: The headphones power OFF when charging. Headphones cannot charge and play at the same time.

A solid orange light on the left earcup indicates charging and a solid green light indicates a full charge when the USB cable is connected.

  • Fully Charged
  • Charging

CONNECTIONS

PAIRING

The first time you power ON your headphones they will enter pairing mode. Simply connect through the Bluetooth menu on your device and select Nº5909.

To manually activate pairing mode, power headphones OFF, then hold ON/OFF button for 4 or more seconds.

Pairing to 2 or More Devices

  1. Enter pairing mode and connect to device 1.
  2. Enter pairing mode again and device 1 will disconnect.
  3. Connect to device 2 and turn headphone off.
  4. Turn headphone ON and headphone will automatically connect to device 1 and 2 simultaneously.
  5. Pause one device and play from the other to swap headphone connection.

NOTE: Maximum number of devices that can be connected at any given time – 2 source devices.

PASSIVE

The № 5909 can be connected passively to any product that has an analog 3.5mm or 6.3mm (1/4″) audio connetion using the included 1.25m or 4m to USB-C proprietary audio cables included.

  1. Choose the appropriate length (1.25m or 4m) proprietary audio cable depending on distance from the source component.
  2. Plug the USB-C connection end into the USB-C input on the Right ear cup.
  3. Plug the 3.5mm stereo mini jack on the other end of the cable to your source component’s headphone input. If needed, use the 6.3mm (1/4″) adaptor for traditional audio components.

NOTE: When connecting passively, none of the electronic or app functions are operational.

Connections

USB DIGITAL DIRECT

The № 5909 can be connected and used to listen to content via USB Digital Direct using the standard USB-C to USB-C charging cable included.

  1. Plug one end of the USB-C to USB-C cable directly into one of your computer’s USB connections (use the included USB-C to USB-A adaptor if needed).
  2. Plug the other end of the USB-C cable into the USB-C input on the right ear cup of the headphone.
  3. From your computer device, open the “sound settings” and locate and select the “No 5909” under the speaker label.
  4. Adjust your volume via the slider on your computer.
  5. Start your content – enjoy.

NOTE: ANC functions will continue to operate via the left ear cup ANC button AND the headphone will charge while in this connection method.

MARK LEVINSON HEADPHONE APP

The Mark Levinson Headphones app allows you to choose your listening preference and select Active Noise Cancellation and Awareness modes. Select Bass Contour settings, Set on-head detection and auto time-off parameters.

MAINTENANCE / CARE

Clean ear pads and headphones with soft, slightly damp cloth. Do not soak, submerge or allow moisture to enter near the drivers or cable jacks. Ear pads and cables can be purchased if they are worn out at: www.marklevinson.com

Polishing cloth can be used to wipe down the headphones after use / remove finger prints, etc.

Do not drop, sit on, or allow the headphones to be exposed to water, moisture, or temperature extremes.

It is recommended that you return your headphones to their hard travel case when not in use. To avoid damage, do not store other items in the travel case along with your headphones.

CAUTION: Incorrectly rotating or over rotating the earcups can damage the headphones.

Temperature Range Operate and store this product within the temperature range of -4°F to 113°F (-20°C to 45°C) only. Charge the battery where the temperature is between 41°F and 104°F (5°C and 40°C) only.

CHANGING / REMOVING EARPADS

To remove ear pads: Gently pull the earpads from the inside of the earcup. The snaps will release.

To re-attach ear pads: Gently push the earpad against the earcup, ensuring all the snaps are secured.

ACCESSORIES

  • Travel Storage Case
  • USB-C to USB-C Charging Cable
  • USB-C to USB-A Charging adaptor
  • USB-C to 3.5mm Proprietary Audio Cable (Both 1.25mm and 4mm Audio Cables included)
  • 3.5mm to 6.3mm (1/4″ standard) headphone adaptor
  • Airplane adaptor

TROUBLESHOOTING

TROUBLE PAIRING HEADPHONES AND DEVICE

THE HEADPHONES AND DEVICE DO NOT PAIR:                                                                  
Make sure the headphones are not connected to the charger. Cycle power switch OFF and ON.   Turn the Bluetooth OFF, then on again on the source device.   Turn OFF the Bluetooth feature on any other device that is paired with the headphones.   Hold power button down >4 seconds to enter pairing mode.   Make sure “Nº5909″ is selected in the Bluetooth® device list
 NO AUDIO OR POOR AUDIO QUALITY FROM A CONNECTED BLUETOOTH DEVICE                                                                                                                    
Move the device closer to the headphones, physical objects between the headphone and the source may obstruct the signal.
Try another music application or try another track.
Try a different audio device.
  FACTORY RESET                                                                                                      
1. Power OFF the headphones.
2. Hold power button >4 seconds to enter pairing mode.
3. Simultaneously hold volume + button and power button until LED lights flash red/white.

EAR HEALTH

Our ability to hear is amazing. The Mark Levinson team wishes you to treat your ears like the precious tools they are so they will continue to provide you a lifetime of incredible sonic experiences.

In general, do not listen “too loud or for too long,” and be attentive to your own ears. Ringing, discomfort, or sensitivity to high frequencies and treble may be a signal from your ears that you are pushing them to their limits and causing irreparable damage.

As a general practice, find what seems to be your preferred listening level and then adjust the volume down another 10% or more. Surprisingly, your ears will attune to a slightly lower volume over time, and what seems quiet at first can be perfect for longer listening periods.

SPECIFICATIONS

General

TypePremium High-Resolution Over-the-Ear Wireless Adaptive ANC Noise Cancelling Headphone
Driver Size40mm Beryllium Driver
Frequency Response (Passive)10Hz – 40kHz
Frequency Response (Active)20Hz – 20kHz
Sensitivity97dB SPL @1kHz/1mW
Maximum SPL98dB
Maximum Input Power (Passive)100mW
Microphone Sensitivity-32dBV @ 1kHz/Pa
Impedance32 ohm
Bluetooth Transmitted Power<8dbm
Bluetooth Transmitted ModulationGFSK, π/4 DQPSK / 8DPSK
Bluetooth Frequency2.402Ghz – 2.480Ghz
Bluetooth Profile VersionA2DP 1.3.1, AVRCP 1.6, HFP 1.7.1
Bluetooth Versionv5.1
Battery TypeLithium-ion battery (750 mAh/3.7V)
Power Supply5V / 1.0A
Charging Time100 minutes
Music Playtime With BT On34 hrs
Music Playtime With BT & ANC On30 hrs
Music Playtime With Aux-In & ANC On30 hrs
Dimensions (H x W x D)202.6mm (7.9″) x 205.4mm (8.1″) x 65.4mm (2.6″)
Weight340g (12 oz)

Harman

HARMAN International Industries, Incorporated 8500 Balboa Boulevard

Northridge, CA 91329 USA

© 2022 HARMAN International Industries, Incorporated. All rights reserved.

Mark Levinson is a registered trademark of HARMAN International Industries, Incorporated.

Other company and product names may be trademarks of the respective companies with which they are associated.

This document should not be construed as a commitment on the part of HARMAN International Industries, Incorporated. The information it contains, as well as the features, specifications and appearance of the product, is subject to change without notice. HARMAN International Industries, Incorporated, assumes no responsibility for errors that may appear within this document

For customer service and product shipment information, refer to our Website: www.MarkLevinson.com Part No. 070-00004 rev B.0

Source

Read More

Leave a Comment