Steelseries ARCTIS 1 Wireless For Xbox Gaming Headset User Manual

If you are searching for Steelseries ARCTIS 1 Wireless For Xbox Gaming Headset User Manual. Let’s check this manual guide.

Steelseries ARCTIS 1 Wireless For Xbox Gaming Headset User Manual

Steelseries ARCTIS 1 Wireless For Xbox Gaming Headset User Manual
Steelseries ARCTIS 1 Wireless For Xbox Gaming Headset User Manual

Specifications

Speaker Drivers

Headphone Frequency Response20–20000 Hz
Headphone Sensitivity98 dBSPL
Headphone Impedance32 Ohm
Headphone Total Harmonic Distortion< 3%
Headphone Volume Control40 mm

Microphone

Frequency Response100–6500 Hz
TypeDetachable boom
Sensitivity-38 dBV/Pa
Polar PatternBidirectional Noise-Cancelling

Wireless

TypeLossless 2.4 GHz
Range30ft / 9m
Battery Life20 hours

SYSTEM REQUIREMENTS // COMPATIBILITY

  • PC
  • Playstation 4
  • Nintendo Switch
  • Android (with USB-C)

PRODUCT OVERVIEW

  1. Airweave Ear Cushions*
  2. ClearCast Microphone
  3. Volume Wheel
  4. Microphone Mute Switch
  5. 3.5 mm Audio Jack
  6. Power Button
  7. Power LED
  8. Micro-USB Jack for charging and firmware updates
  9. Microphone Jack
  10. USB-C wireless Dongle
  11. Micro-USB charging Cable
  12. USB-C to USB-A Adapter Cable
  13. 3.5 mm Audio Cable
Steelseries ARCTIS 1 Wireless For Xbox Gaming Headset PRODUCT OVERVIEW
Steelseries ARCTIS 1 Wireless For Xbox Gaming Headset PRODUCT OVERVIEW

SETUP

  • WIRELESS SETUP
  • WIRED SETUP
Steelseries ARCTIS 1 Wireless For Xbox Gaming Headset SETUP
Steelseries ARCTIS 1 Wireless For Xbox Gaming Headset SETUP

CHARGING

To charge the headset, connect the micro-USB charging cable to the micro-USB jack on the headset, and plug the other end into any USB power source.

The color of the power LED indicates the battery level.

Green100–50 %
Yellow49–20 %
Red19–10 %
Red (fast blink)9–1 %

POWER ON/OFF

  • On: To power on the headset press and hold the power button for at least 2 seconds. You will hear a tone, and the power LED will illuminate.
  • Off: To power off the headset press and hold the power button for at least 3 seconds.

PAIRING

  1. Connect the USB-C wireless dongle to a Windows PC with SteelSeries Engine installed
  2. Initiate wireless dongle pairing from Engine
  3. With the headset off, press and hold the power button for 6 seconds
  4. You will hear a tone when the pairing is completed

Note: The headset is already paired with the transmitter out of the box.

MICROPHONE

  • Microphone attachment
  • Position the microphone close to the corner of your mouth with the flat surface facing you

MULTIMEDIA CONTROL

Answer/end voice callsingle · press Power Button
Play/pause musicsingle · press Power Button
Next trackdouble · · press Power Button
Previous tracktriple · · · press Power Button

FAQ

How does sound compare to Arctis 7?

Arctis 1 Wireless uses the same high quality, low distortion speaker drivers that are found in the Arctis 3, 5, 7 & 9 series products. So you’ll enjoy the same Arctis signature sound no matter which model you buy.

How do I make the USB-C dongle work on Switch and Android?

The wireless is completely plug and play. Simply plug the compact USB-C dongle into your Switch or Android phone, and it’s immediately detected. The audio switches automatically. Then just power on the headset and you’re up and running. No pairing or settings management required!

What if my PC or Xbox doesn’t have USB-C?

The Arctis 1 Wireless for Xbox includes an adapter cable that allows you to connect the wireless dongle to any traditional USB-A port. The functionality is completely identical whether connecting to USB-A with the adapter or natively to a USB-C jack.

Does it use Bluetooth?

No, the Arctis 1 Wireless uses a gaming-grade 2.4GHz wireless platform, the same technology used in the Arctis 7 and Arctis Pro Wireless headsets. This gives you significantly better performance than Bluetooth. The audio is lossless instead of compressed for far better quality. It also has ultra-low latency so that you hear every sound as it happens on screen, as opposed to Bluetooth, which can have significant delays.

Why is voice chat not available on older Samsung Galaxy phones?

Samsung Galaxy phones prior to the Galaxy Note 10 do not have voice functionality via USB-C for any peripherals at this time. This means that you can hear your media such as games, music, and videos, but will not be able to use any USB-C products for voice calls or voice chat. We are hopeful that Samsung adds this functionality in future updates.

Source

Read More

Leave a Comment