Boat has launched newly airdopes. So we will unbox the boAt Airdopes 411 ANC User Manual in this post.
boAt Airdopes 411 ANC User Manual
Get ready to immerse yourself in musical bliss with your very own pair of boAt Airdopes 411 ANC.
Please consider this manual as guiding map towards the unparalleled shores of musical bliss. Knowledge of bluetooth and device connectivity is essential for steering this boat and therefore we strongly recommended through reading this manual. Also you may refer to the same at times when you face any sort of difficulty in future.
Package Contains
- 1N Airdopes 411 ANC
- 2N Extra Earmuffs
- 1N Type C Cable
- 1N user manual
- 1N Warranty card
- 1N Catalogue
- 1N Read me card
- 1N Faq card
Power on (First time user)
Step 1: To switch the earbuds on (Smart Power On) simply open the lid Of the charging case (when earbuds are inside). Our (Insta Wake N’ Pair) Technology enables the earbuds to power an automatically, get connected and enter into the connection mode.
OR
Long touch the CTC on both earbuds for 3 seconds to manually power on the earbuds.
Step 2: Both the earbuds will automatically pair With each Other. The earbuds will enter into the Connection Mode.
Step 3: Turn on the Bluetooth functionality on your phone/media device and scan.
Step 4: Search for ‘Airdopes 411 ANC’ and pair accordingly.
Congratulations! Your earbuds are now connected successfully via Bluetooth and indicated by slow blue LED flashes on the master (right) earbud and solid blue LED on the left earbud.
Note
- pairing mode for 5 minutes. If the rime is missed then you need to reconnect the ear-buds and follow the above mentioned procedure.
- Airdopes 411 ANC remembers previously connected devices; once switched on, the earbuds automatically reconnect to the previously connected devices.
- When the right earbud is being kept inside the case and the left earbud is kept outside. The left earbud performs as the master earbud.
Single Earbud Usage
Step 1: Please note that both the earbuds can be used in mono mode use Smart Power On or Manual Power On for switching on the desired earbud.
Step 2: The selected earbud will automatically enter the connection mode.
Step 3: Turn on Bluetooth on your phone/media device and search for ‘Airdopes 411 ANC’ to connect.
Note
- To switch to stereo mode, simply take out the other earbud from the case, It will automatically power on and pair with the previously selected earbuds, hence enabling stereo usage.
Quick Glance on Functionalities
Charging the Earbuds
Step 1: Please insert the earbuds back inside the charging case in correct orientation.
Remaining battery indication
When earbuds get kept inside the case. during that brief period the case LED indicates the remaining battery for the earbuds.
| Battery Capacity | LED State |
| Less than or equal to 20% | Stays red for 5 seconds |
| 20%-80% | Stays yellow for 5 seconds |
| Greater than 80% | Stays green for 5 seconds |
Note: Before using the ear-buds for the first time, it is recommended to fully charge the ear-buds Also, please keep the lid of the charging case closed while charging.
Charging the Case
Step : To charge the case, plug one end of the provided cable into the case and connect the other end to a computer,’ wall adapter/ power bank, etc.
Case LED States (Charging Mode)
| Battery Capacity | LED State |
| Less than or Equal to 20% | Red |
| 20-80% | Yellow |
| 80 to 99% | Green |
| 100% | LED Turns off |
Case LES states (non-charging mode)
when earbuds are outside the case and the case lid gets opened:
| Battery Capacity | LED State |
| Less than or equal to 20% | Stays red for 10 seconds |
| 20%-80% | Stays yellow for 10 seconds |
| 80-99% | Stays green for 10 seconds |
Basic Function
- Active noise cancellation : mode in normal mode long touch either CTC for 2 seconds to activate ANC mode.
- Ambient Mode : in ANC mode, long touch either CTC for 2 seconds to activate ambient mode for transparency towards your audible surroundings; to switch back to normal mode, long touch either CTC for 2 seconds.
- Voice Assistant: triple tap the CTC on either earbud to activate the default smart voice assistant.
- Answer Call: Double tap the CTC on either earbud to answer an incoming call
- Hang up Call : Double tap the CTC on either earbud to hang up an ongoing call.
- Reject Call: Long touch the CTC for up to 2 seconds to reject incoming calls.
- Play/Pause Music: Double tap the CTC on either earbud.
- Volume up – Single tap the CTC on right earbud in steps to increase the volume.
- Volume down – Single tap the CTC on Left earbud in steps to decrease the volume.
Voice Assistant
Step 1 : Triple tap the CTC on either earbud to activate the voice assistant.
Step 2 : The respective voice assistant screen pops up and you may place your commands at ease.
Tips : You may try out the following commands.
Smart Power Off
Step 1: After usage, remove both the earbud5 from your ears.
Step 2: Place the earbuds back into the charging case in correct orientation and close the lid.
Step 3: The earbuds will automatically switch off (and enter into charging mode).
Manual power Off
Step 1: Long touch the both CTC for 10 seconds to manually power off the earbuds.
Step 2: Once the earbuds get turned off, place them back inside the case and close the lid.
Factory Reset
Perform the Factory Reset in case you face any difficulty while operating your Airdopes 411 ANC.
NOTE: Before performing reset, clear “Airdopes 411 ANC” from pairing device history by forgetting device.
Step 1: Place both the earbuds back inside the charging case.
Step 2: While the earbuds are inside the case, long touch both CTCs for 6 seconds until charging case LED blinks thrice in red colour.
Step 3: Close the lid of the case and then reopen.
Step 4 : Perform a fresh connection attempt again and enjoy.
Congratulations! Your Airdopes 411 ANC has been Reset
Troubleshooting
| potential problem | Solution |
| If one earbud is not working | Perform the factory reset |
| If earbuds are not in connection/scan mode | Perform the factory reset |
| If earbuds disconnect during phone call | Charge the earbuds or perform the factory reset |
| If there are other exceptions in usage | Place the earbuds back into the charging case and try using them again or perform the factory reset |
| If the Touch controls don’t seem to respond phone call. | After long usage, residual stains and perspiration can affect the touch control area. please use a clean cloth to wipe softly. |
Specifications
| Headphone Type | ANC TWS earbuds |
| Bluetooth version | V5.2 |
| Water resistance | IPX4 |
| IWP technology | Yes |
| ANC | up to 25dB |
| ENx Tech (by default) | Yes |
| Music playtime | Up to 5h per earbud (non-ANC), Up to 4H per earbud (ANC), up to 12.5H additional (case) @60% volume |
| Standby time | 50H |
| Charging technology | ASAP Charge |
| Transmission range | 10m |
| Driver size | 10mm*2 |
| Bluetooth profiles | A2DP, AVRCP, HFP, HSP, SPP |
| Frequency | 20Hz-20kHz |
| Battery | 320mAh (case) 37mAh*2 (Earbuds) |
| Charging time | 1.5H Earbuds, 2H case |
| Charging interface | Type C |
| Charging interface | Type C |
Warning
- Please follow the instructions to operate
- Please don’t use the earbuds in extreme temperatures
- Please don’t use the product near water
- Please keep the product away from heat sources, as the heat may damage it.
- don’t jam the ports such as charger port, LED port, etc.
- It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the earbuds service life.
Advisable : The earbuds may start at a 100% volume and it may need to be reduced when they are switched on at first. This can be done by using the touch gesture volume controls on the earbuds.
Source
- www.boat-lifestyle.com
- Download User Manual – Download
- Product Page – Click Here
Read More
- Boat Rockerz 330 Bluetooth Headphones User Manual
- Boat Rockerz 255 Pro Bluetooth Earphones User Manual
- boAt Rockerz 333 Bluetooth Earphones User Manual
- BOAT Airdopes 281 Pro Wireless Earbuds User Manual
Don’t Miss