Marshall Motif ANC Earbuds User Manual

by

Marshall Motif ANC Earbuds User Manual : Here we will check the user guide for Motif ANC earbuds. Let’s get started.

Join Us on Telegram : Click Here

Marshall Motif ANC Earbuds User Manual

Marshall Motif ANC Earbuds User Manual
Marshall Motif ANC Earbuds User Manual

GETTING STARTED

  1. Open the charging case.
  2. Press and hold the button on the case until the LED turns to a slow blue pulse.
  3. Select MOTIF A.N.C. from your sound device’s Bluetooth® list.
  4. Download the Marshall Bluetooth app and follow the in-app instructions to complete the setup.

TOUCH CONTROLS

Touch the left or right earbud to control your music, phone calls and more. The long touch behaviour can be customised in the app.

  1. touch to play/pause or receive/end a call
  2. touches to skip forward or reject a call
  3. touches to skip backward
  • Long touch to toggle noise cancelling, transparency and ANC off.

CHARGING THE EARBUDS

Put your earbuds back in the case and close the lid to turn them off and begin charging.

CHARGING THE CASE

Use a wireless charger or plug the case into a USB power source to charge it. The case is fully charged when the front-facing LED is steady green. To charge the case using a wireless charger, follow the instructions below.

  1. Place the charging case with its back flat against the wireless charging pad.
  2. Make sure that the front LED lights up to indicate that the case is charging.
  3. Once the LED light has turned steady green the case is fully charged.

LED INDICATOR

The LED shows the case battery charge, from red through yellow to green (0–100%). It pulses blue while in Bluetooth pairing mode.

NOISE CONTROL

Long touch either earbud to cycle through the noise control modes.

  • Noise cancelling mode – blocks out your surroundings and lets you focus on the music
  • Transparency mode – allows you to hear your surroundings and hold conversations without removing your earbuds
  • Off – noise control is turned off.

The amount of noise cancelling and transparency can be adjusted in the Marshall Bluetooth app.

PAIRING A NEW DEVICE

Motif A.N.C. remembers up to 3 previously paired devices and will try to reconnect with the last connected device.

  1. Place the earbuds in the case and keep the lid open.
  2. Press and hold the button on the case until the LED turns to a slow blue pulse.
  3. Select MOTIF A.N.C. from your sound device’s Bluetooth list

Note: Motif A.N.C. can be connected with one sound device at a time. Make sure to
disconnect from the current device before reconnecting with a different device.

RESETTING THE EARBUDS

If your earbuds become erratic or unresponsive, follow the instructions below.

  1. Place the earbuds in the case and close the lid to restart the earbuds.

If the problem persists, perform a hardware reset:

  1. Place the earbuds in the case and keep the lid open.
  2. Press and hold the touch surface on both earbuds for 4 seconds to reset the earbuds.

If the problem persists, perform a factory reset.
Note: This will delete all user settings and the earbuds will need to be set up again.

  1. Place the earbuds in the case and keep the lid open.
  2. Press and hold the the button on the case for 10 seconds, until the LED turns purple, to reset the earbuds to factory settings.
  3. Remove MOTIF A.N.C. from your sound device’s Bluetooth list before pairing again.
Marshall Motif ANC Earbuds User Manual
Marshall Motif ANC Earbuds User Manual

Source

Read More :

Leave a Comment