Ptron Atom Rover Wireless Mono Headset User Manual

If you are finding Ptron Atom Rover Wireless Mono Headset User Manual then you search ends here.

Ptron Atom Rover Wireless Mono Headset User Manual

Ptron Atom Rover Wireless Mono Headset User Manual
Ptron Atom Rover Wireless Mono Headset User Manual

Technical Specifications

  • Bluetooth 4.2 dual-module chip.
  • Support voice dialing (requires phone support).
  • Support music playing control/next song/previous song, and automatic switch when there is incoming call.
  • Support dual pairing.
  • Bluetooth profile supports advanced audio transfer protocol (A2DP), remote audio control (AVRCP), broadband handsfree v1.6 (HFP), headphone v1.2 (HSP), secure simple pairing (SSP2).
  • Noise and wind noise reduction activates digital signal processing (DSP).
  • Internal adaptive 5-segment equalizer.
  • Stainless steel wind screen.
  • Sound fiber web.
  • Support various smart phones and tablet PCs.
  • Transmission Range: Up to 10m from the paired device
  • Frequency Response: 20Hz-20khz
  • Impedance: 32ohms
  • SNR: 85dB
  • Talk time/Music Playtime: Up to 8 hours*
  • Battery Capacity: 90mah
  • Charging Time: 90 min.
  • Standby Time: 200 Hours
  • Weight: 60g
  • Wall charger: 100-240V
  • Power supply: 5V DC, 180mA
  • Operating temperature: 32°F-104°F (0-40°C)
  • Storage temperature: 32°F-104°F (0-40°C)
  • Charging temperature: 32°F-104°F (0-40°C)

Headphone Overview

Ptron Atom Rover Wireless Mono Headset Headphone Overview
Ptron Atom Rover Wireless Mono Headset Headphone Overview

Headphone Wearing

Operation

First pairing

1) Move the power switch to position, and the unit enters pairing status when the red LED and blue LED flash alternately. It means pTron Atom Rover is ready to pair.

Wearing the headphone

2) Turn on Bluetooth on the mobile phone, and set it to scan for devices.
iPhone: Settings > General > Bluetooth > On Android TM phone: Settings > Wireless & Networks >
Bluetooth: On > Scan devices.

Note: The menu depends on the mobile phone’s OS.

3) When the Bluetooth headphone pTron Atom Rover is found the system prompts “Pairing” until “connected”.

Note: If your headset is un-paired or disconnected from your device, please restart the headset and follow the pairing process again.

Making/answering calls

  1. Answer/reject manually: When there is an incoming call, the system reports the caller number (requires phone support), and you can tap the button to answer the call or press and hold it to reject the call.
  2. Answer/reject via voice: When there is an incoming call, you can say “YES” to answer the call or say “NO” to reject the call. This feature depends on the mobile phone’s OS.
  3. Callback: Press the button twice consecutively to call back the last call.
  4. Voice assistant/Voice dial: Press the button once to activate voice assistant. You can use voice assistant to dial number (requires phone support, i.e. the phone supports voice search).

Play/Pause/Volume control/Previous/Next

  1. Play/Pause: In music playing state, press to pause, and tap it again to resume playing.
  2. Volume control: In music playing state, move & long press the button to adjust the volume.
  3. Previous/next: In music playing state, move & short press and the button to select previous/next track.

Charging Feature

When the unit is being used, the system will beep four times in the interval of 5 minutes. When the unit prompts “Turn off”, it requires charging. The red LED is on when the unit is being charged, and the blue LED is on when fully charged.

Note: If the headphone won’t be used for long time, please charge it at least once every month to avoid damage.

Source

Read More

1 thought on “Ptron Atom Rover Wireless Mono Headset User Manual”

  1. When I got my PTron Rover it was in English. Now it speaks in Chinese since I hooked it up to my A8 Tablet I bought off of wish

    Reply

Leave a Comment