BOAT Airdopes 173 Wireless Earbuds User Manual

BOAT Airdopes 173 Wireless Earbuds User Manual : Let’s unbox the user guide manual for boAt Airdopes 173 Wireless Earbuds.

BOAT Airdopes 173 Wireless Earbuds User Manual

BOAT Airdopes 173 Wireless Earbuds User Manual
BOAT Airdopes 173 Wireless Earbuds User Manual

Get ready to immerse yourself in musical bliss with your very own pair of boAt Airdopes 101. Please consider this manual as your guiding map towards the unparalleled shores of musical bliss. Knowledge of Bluetooth and device connectivity is essential for steering this boat and therefore we strongly recommend thorough reading of this manual; also, you may refer to the same at times when you face any sort of difficulty in future.

Specifications

Bluetooth VersionV5.0
IWP TechnologyYes
Music PlaytimeUp to 3H per charge;
Up to 12H additional with Case
Standby Time100H
Transmission Range10m
Driver Size13mm*2
Bluetooth ProfilesHFP/ HSP/ A2DP/ AVRCP
Frequency24Hz-24kHz
Battery650mAh (Case) 40mAh*2 (Earbuds)
Charging Time2H
Charging InterfaceType C
Product Weight7.48g

Package Contents

  1. 1x boAt Airdopes 10
  2. 1x Charging Case
  3. 1x Type-C Charging Cable
  4. 2x Pairs Of Additional Earmuffs (Small & Large)
  5. User Manual
  6. Warranty Card
  7. Catalogue

Overview

  1. CTC (Capacitive Touch Control) / Power Button
BOAT Airdopes 173 Wireless Earbuds Overview
BOAT Airdopes 173 Wireless Earbuds Overview

Power On

Step 1: To switch the earbuds on (Smart Power On) simply open the lid of the charging case (when earbuds are inside). Our IWP™ (Insta Wake N’ Pair) Technology enables the earbuds to power on automatically, get connected and enter into the connection mode.
OR
Long touch the CTC on both earbuds for 3 seconds to manually power on the earbuds.

Step 2: Both the earbuds will automatically pair with each other. The earbuds will enter into the connection mode, indicated by red and blue LED flashes.

Step 3: Turn on the Bluetooth functionality on your phone/media device and scan.

Step 4: Search for ‘Airdopes 101’ and pair accordingly.

BOAT Airdopes 173 Wireless Earbuds Power On
BOAT Airdopes 173 Wireless Earbuds Power On

Congratulations! Your earbuds are now connected successfully via Bluetooth.

Note :

  • Pairing mode lasts for 5 minutes. If the pairing time is missed then you will need to reconnect the ear-buds and follow the above mentioned procedure.
  • Airdopes 101 remembers previously connected devices; once switched on, the ear-buds automatically reconnect to the previously connected devices.

LED Indicators / Functionalities

BOAT Airdopes 173 Wireless Earbuds LED Indicators Functionalities
BOAT Airdopes 173 Wireless Earbuds LED Indicators Functionalities

Single Earbud Usage

Step 1: Please note that both the earbuds can be used in mono mode. Use
Smart / Manual Power On for switching on the desired earbud.

Step 2: The selected earbud will automatically enter the connection mode indicated by red and blue LED flashes.

Step 3: Turn on Bluetooth on your phone/media device and search for ‘Airdopes 101’ to connect.

BOAT Airdopes 173 Wireless Earbuds Single Earbud Usage
BOAT Airdopes 173 Wireless Earbuds Single Earbud Usage

Notes:

  • To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage.
  • You cannot skip tracks or return to the previous tracks in Mono mode.

Charge the Earbuds

Step 1: Please insert the earbuds back inside the charging case in correct orientation.

Step 2: A solid red LED indicates that the earbuds are being charged. Once fully change the LED turns off.

Step 3: Once the earbuds are fully charged, the charging case automatically switched off to saver power.

Note: Before using the ear-buds for the first time, it is recommended to fully charge the ear-buds. Also, please keep the lid of the charging case closed while charging.

Charge The Case

Step: To charge the case, plug one end of the provided cable into the case and connect the other end to a computer/ wall adapter/ powerbank, etc.

Warning: Please do not charge the carry case with “9V” or “12V” output. Otherwise, it may cause damage to the case. Charge only according to the charging norms (not more than 5V 2A).

Remaining Case Battery Indicator
0-50%: Red
50-100%: Green

Basic Functions

Voice Assistant: Long touch the CTC on either earbud for 2 seconds to activate the voice assistant.
Answer/Hang Up Call: Single tap the CTC on either earbud to answer an incoming call and once again to hang up an ongoing call.
Reject Call: Long touch the CTC for up to 1.5 seconds to reject incoming calls.
Play/Pause Music: Single tap on either earbud’s CTC to play or pause music.
Next Track: When playing music, double tap the right CTC to skip to the next song.
Previous Track: When playing music, double tap the left CTC to return to the previous song.

Voice Assistant

Step 1: Long touch the CTC on either earbud for 2 seconds to activate the smart voice assistant.

Step 2: The respective voice assistant screen pops up and you may place your commands at ease.

Tips: You may try the following commands,

  • What is the weather?
  • Play a song
  • Set a reminder
BOAT Airdopes 173 Wireless Earbuds Voice Assistant
BOAT Airdopes 173 Wireless Earbuds Voice Assistant

Smart Power Off

Step 1: After usage, remove both the earbuds from your ears.

Step 2: Place the earbuds back into the charging case in correct orientation and close the lid.

Step 3: The earbuds will automatically switch off (and enter into charging mode).

Manual Power Off

Step 1: Long touch the CTC on either earbud for 5 seconds.

Step 2: Once the earbuds get turned off, place them back inside the case and close the lid.

Factory Reset

Perform the Factory Reset in case your any difficulty while operating your airdopes 101

Step 1: Place both the earbuds back inside the charging case in correct orientation and close the lid.
Step 2: Take out both the earbuds from the case and triple tap on both CTCs (outside the case) to do Factory reset, which is indicated by the red LED.
Step 3: Keep them back inside the case and shut the lid; after a few seconds re-open it again.
Step 4: Once you take the earbuds out from the charging case, the Reset gets completed.
Step 5: Congratulations! Your Airdopes 101 has been reset.

*NOTE: Before performing reset, clear “Airdopes 101” from pairing device history by forgetting device.

Troubleshooting

Potential ProblemSolution
If one earbud is not workingPerform the Factory Reset
If earbuds are not in connection/scan modePerform the Factory Reset
If earbuds disconnect during phone callCharge the earbuds or perform the Factory Reset
If there are other exceptions in usagePlace the earbuds back into the charging case and
try using them again or perform the Factory Reset
If Touch Controls don’t seem to respondAfter long usage, residual stains & perspiration
can affect the touch control area, please use a
clean cloth to wipe those areas softly

Charging norms & Precautionary Guidelines

Charger/Brick/Adapter5V 2A
Cable/WireStandard Cable (35 strands @0.10mm diameter/ strand)
Any other accessory can be paired up with the product as long as the
specifications are as per above norms.

Source

Read More

Leave a Comment