Read Marshall Minor 3 Earbuds User Manual for Charging, Pairing, Resetting & Touch Control

If you own Marshall Minor 3 earbuds, you can read Marshall Minor 3 Earbuds User Manual for getting started, charging, pairing, touch control, and resetting for fixing one side earbuds not working.

So let’s start diving deep into the detailed guide so that you can use marshall minor 3 earbuds easily.

Marshall Minor 3 Earbuds User Manual

Marshall Minor 3 Earbuds User Manual
Marshall Minor 3 Earbuds User Manual

GETTING STARTED: On/Off

  1. Open the charging case.
  2. Press and hold the button on the bottom of the case until the
    LED turns to a slow blue pulse.
  3. Select MINOR III from your sound device’s Bluetooth list.

TOUCH CONTROLS

Touch the left or right earbud to control your music and phone calls.

  1. touch to play/pause or receive/end a call
  2. touches to skip forward or reject a call
  3. touches to skip backward.

How to Charge the Earbuds

Put your earbuds back in the case and close the lid to turn them off and begin charging.

How to charge the case

Use a wireless charger or plug the case into a USB power source to charge it. The case is fully charged when the front-facing LED is steady green.

To charge the case using a wireless charger, follow the instructions below.

  1. Place the charging case with its back flat against the wireless charging pad.
  2. Make sure that the front LED lights up to indicate that the case is charging.
  3. Once the LED light has turned steady green the case is fully charged.

LED INDICATOR

The LED shows the case battery charge, from red through yellow to green (0–100%). It pulses blue while in Bluetooth pairing mode.

How to pair Marshall Minor 3 Earbuds?

Minor III remembers up to 6 previously paired devices and will try to reconnect with the last connected device.

  1. Place the earbuds in the case and keep the lid open.
  2. Press and hold the button on the bottom of the case until the LED turns to a slow blue pulse.
  3. Select MINOR III from your sound device’s Bluetooth list.

Note: Minor III can be connected with one sound device at a time. Make sure to disconnect from the current device before reconnecting with a different device.

How to Reset (Marshall Minor 3 One Side Not Working)

If your earbuds become erratic, or unresponsive, or one side not working follow the instructions below.

  1. Place the earbuds in the case and close the lid to restart the earbuds.
    If the problem persists, perform a factory reset.
    Note: This will delete all user settings and the earbuds will need to be paired again.
  2. Place the earbuds in the case and keep the lid open.
  3. Press and hold the Bluetooth pairing button for 10 seconds, until the LED turns purple, to reset the earbuds to factory settings.
  4. Remove MINOR III from your sound device’s Bluetooth list before pairing again.

If the problem persists, perform a hardware reset.
Note: This will delete all user settings and the earbuds will need to be paired again.

  1. Place the earbuds in the case and keep the lid open.
  2. Press and hold the Bluetooth pairing button for 15 seconds to reset the earbuds.
  3. Remove MINOR III from your sound device’s Bluetooth list before pairing again.
Marshall Minor 3 Earbuds User Manual
Marshall Minor 3 Earbuds User Manual

Source

Read More :

Leave a Comment